Home › General › SPECIFICATIONS › ALIGNMENT / HANDLING DIAGNOSIS › 2017.09–2017.12
RM33A0E _V1 General _065355 SPECIFICATIONS _0318945 ALIGNMENT / HANDLING DIAGNOSIS F

SPECIFICATIONS  ALIGNMENT / HANDLING DIAGNOSIS  SERVICE DATA  


Vehicle Height (Unloaded Vehicle):
Engine Front A - B Rear C - D

*: for Rough Road Area Specification Vehicles

2AR-FE
A25A-FKS
150 mm (5.91 in.)
138 mm (5.43 in.)*
49 mm (1.93 in.)
38 mm (1.50 in.)*
2GR-FKS 140 mm (5.51 in.)* 41 mm (1.61 in.)*


Measurement Points:

A: Ground clearance of front wheel center


B: Ground clearance of center of bolt head of front lower No. 2 suspension arm bushing (rear bolt of front lower No. 1 suspension arm sub-assembly).


C: Ground clearance of rear wheel center


D: Ground clearance of center of bolt head of rear No. 2 suspension arm assembly and rear suspension member sub-assembly.


Camber (Unloaded Vehicle):
- Engine Camber Inclination Right-left Difference

*: for Rough Road Area Specification Vehicles

Front 2AR-FE
A25A-FKS
-0°30' +/- 0°45' (-0.50° +/- 0.75°)
-0°20' +/- 0°45' (-0.33° +/- 0.75°)*
0°45' (0.75°) or less
2GR-FKS -0°25' +/- 0°45' (-0.42° +/- 0.75°)*
Rear 2AR-FE
A25A-FKS
-1°10' +/- 0°45' (-1.17° +/- 0.75°)
-0°55' +/- 0°45' (-0.92° +/- 0.75°)*
0°45' (0.75°) or less
2GR-FKS -1°00' +/- 0°45' (-1.00° +/- 0.75°)*


Caster (Unloaded Vehicle):
Engine Caster Inclination Right-left Difference

*: for Rough Road Area Specification Vehicles

2AR-FE
A25A-FKS
5°20' +/- 0°45' (5.33° +/- 0.75°)
5°15' +/- 0°45' (5.25° +/- 0.75°)*
0°45' (0.75°) or less
2GR-FKS 5°15' +/- 0°45' (5.25° +/- 0.75°)*


Steering Axis Inclination (Unloaded Vehicle):
Engine Steering Axis Inclination Reference

*: for Rough Road Area Specification Vehicles

2AR-FE
A25A-FKS
12°55' (12.92°)
12°35' (12.58°)*
2GR-FKS 12°40' (12.67°)*


Toe-in (Unloaded Vehicle):
- Engine Specified Condition Right-left Difference

*: for Rough Road Area Specification Vehicles

Front 2AR-FE
A25A-FKS
C + D: 0°09' +/- 0°10' (0.15° +/- 0.17°)
C + D: 0°09' +/- 0°10' (0.15° +/- 0.17°)*
-
B - A: 1.7 +/- 2.0 mm (0.0669 +/- 0.0787 in.)
B - A: 1.8 +/- 2.0 mm (0.0709 +/- 0.0787 in.)*
-
2GR-FKS C + D: 0°09' +/- 0°10' (0.15° +/- 0.17°) -
B - A: 1.7 +/- 2.0 mm (0.0669 +/- 0.0787 in.)* -
Rear 2AR-FE
A25A-FKS
C + D: 0°10' +/- 0°10' (0.16° +/- 0.17°)
C + D: 0°09' +/- 0°10' (0.15° +/- 0.17°)*
-
B - A: 1.9 +/- 2.0 mm (0.0748 +/- 0.0787 in.)
B - A: 1.8 +/- 2.0 mm (0.0709 +/- 0.0787 in.)*
2.0 mm (0.0787 in.) or less
2GR-FKS C + D: 0°11' +/- 0°10' (0.18° +/- 0.17°)* -
B - A: 2.1 +/- 2.0 mm (0.0827 +/- 0.0787 in.)* 2.0 mm (0.0787 in.) or less


Wheel Turning Angle (Unloaded Vehicle):
Engine Tire Size Inside Wheel Outside Wheel

*: for Rough Road Area Specification Vehicles

2AR-FE
A25A-FKS
205/65R16
215/55R17
38°10' +/- 2°00' (38.17° +/- 2.00°)
38°30' +/- 2°00' (38.50° +/- 2.00°)*
32°45' (32.75°)
33°00' (33.00°)*
235/45R18 36°50' +/- 2°00' (36.83° +/- 2.00°)
37°20' +/- 2°00' (37.33° +/- 2.00°)*
31°50' (31.83°)
32°15' (32.25°)*
2GR-FKS 215/55R17 38°25' +/- 2°00' (38.42° +/- 2.00°)* 33°00' (33.00°)*
235/45R18 37°05' +/- 2°00' (37.08° +/- 2.00°)* 32°05' (32.08°)*