Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › OIL PUMP
RM33A0E _52 Drivetrain _065352 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0321823 OIL PUMP A

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  OIL PUMP  DISASSEMBLY  


PROCEDURE

Hide 35617 1.REMOVE CLUTCH DRUM OIL SEAL RING

a.
C374711

Remove the 4 clutch drum oil seal rings from the stator shaft assembly.

NOTICE:

Do not expand the gap of the clutch drum oil seal rings excessively.



Hide 35330F 2.REMOVE OIL STRAINER ASSEMBLY

a.
C374712

Using a T30 "TORX" socket wrench, remove the 2 "TORX" bolts and oil strainer assembly from the front oil pump cover sub-assembly.


Hide 35370 3.REMOVE STATOR SHAFT ASSEMBLY

a.
C362580

Remove the 5 bolts and stator shaft assembly from the front oil pump body.


Hide 35321 4.REMOVE FRONT OIL PUMP DRIVE GEAR

a.
C362581

Remove the front oil pump drive gear from the front oil pump body.


Hide 35322 5.REMOVE FRONT OIL PUMP DRIVEN GEAR

a.
C362582

Remove the front oil pump driven gear from the front oil pump body.


Hide 35311 6.REMOVE FRONT OIL PUMP BODY

a.
C362583

Remove the front oil pump body from the front oil pump cover sub-assembly.


Hide 7.REMOVE RING PIN

a.
C362584

Remove the 2 ring pins from the front oil pump cover sub-assembly.