Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE UNIT
RM33A0E _52 Drivetrain _065352 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0321822 AUTOMATIC TRANSAXLE UNIT A

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE UNIT  DISASSEMBLY  


PROCEDURE

Hide 35572A 1.REMOVE TRANSMISSION CONTROL SHAFT LEVER

a.
C372456

Remove the nut, washer and transmission control shaft lever from the manual valve lever shaft sub-assembly.


Hide 84540 2.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C372457

Remove the 2 bolts and park/neutral position switch assembly from the automatic transaxle case sub-assembly.


Hide 35015S 3.REMOVE REFILL PLUG

a.
C372460

Remove the refill plug and gasket from the automatic transaxle case sub-assembly.


Hide 35405C 4.REMOVE OVERFLOW PLUG

a.
C372461

Using a 10 mm socket hexagon wrench, remove the overflow plug and gasket from the transaxle housing.


Hide 35125C 5.REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE

a.
C372462

Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the transaxle housing.


Hide 32901C 6.REMOVE OIL COOLER UNION SUB-ASSEMBLY

a.
C372463C01
2.146,1.76 2.427,1.958 0.281,0.198 10 false *1
*1 Oil Cooler Union Bolt


Remove the bolt to separate the oil cooler union sub-assembly bracket portion from the automatic transaxle case sub-assembly.


b.

Remove the oil cooler union bolt, 2 gaskets and oil cooler union sub-assembly from the automatic transaxle case sub-assembly.


Hide 32905 7.REMOVE NO. 1 OIL COOLER OUTLET TUBE SUB-ASSEMBLY

a.
C372465

Using a 19 mm union nut wrench, remove the No. 1 oil cooler outlet tube sub-assembly from the automatic transaxle case sub-assembly.


b.
C372467

Remove the O-ring from the No. 1 oil cooler outlet tube sub-assembly.


Hide 35151F 8.REMOVE TRANSMISSION CASE SIDE COVER

a.
C369210

Remove the 10 bolts and transmission case side cover from the automatic transaxle case sub-assembly.


Hide 82125J 9.REMOVE TRANSMISSION WIRE

a.
C361008C01
0.135,0.208 0.448,0.365 0.313,0.156 10 false *a 0.615,3.229 0.927,3.385 0.313,0.156 10 false *b
*a Connector (A)
*b Connector (B)


Disengage the clamp to disconnect the transmission wire from the solenoid lock plate.


b.

Disconnect the 9 solenoid valve connectors.

HINT:
·

Using a screwdriver, disconnect the solenoid valve connector (A) using the procedure shown in the illustration.

·

Using a screwdriver, disconnect the solenoid valve connector (B) using the procedure shown in the illustration.




c.
C361010

Remove the bolt and temperature sensor clamp and disconnect the temperature sensor from the transmission valve body assembly.


d.
C374489

Disconnect the transmission revolution sensor (NT) connector and transmission revolution sensor (NC) connector.


e.
C361015

Remove the bolt and transmission wire from the automatic transaxle case sub-assembly.


Hide 35410 10.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

a.
C361011

Disengage the clamp to disconnect the transmission revolution sensor (NC) wire connector.


b.
C369211

Remove the 9 bolts and transmission valve body assembly from the automatic transaxle case sub-assembly.


c.
C369212C01
2.708,1.688 2.948,1.885 0.24,0.198 10 true *1 2.635,1.99 2.854,2.167 0.219,0.177 10 true *1 2.031,0.302 2.24,0.49 0.208,0.188 10 true *1 1.198,1.938 1.406,2.135 0.208,0.198 10 true *2 1.135,1.615 1.344,1.813 0.208,0.198 10 true *3
*1 Transaxle Case Gasket
*2 No. 1 Front Oil Pump Cover Gasket
*3 No. 2 Front Oil Pump Cover Gasket


Remove the 2 transaxle case gaskets from the automatic transaxle case sub-assembly.


d.

Remove the transaxle case gasket from the counter drive gear sub-assembly.


e.

Remove the No. 1 front oil pump cover gasket from the front oil pump assembly.


f.

Remove the No. 2 front oil pump cover gasket from the front oil pump assembly.


Hide 89413N 11.REMOVE TRANSMISSION REVOLUTION SENSOR (NT)

a.
C361014

Remove the bolt and transmission revolution sensor (NT) from the automatic transaxle case sub-assembly.


Hide 89413S 12.REMOVE TRANSMISSION REVOLUTION SENSOR (NC)

a.
C369213C01
0.823,0.667 1,0.667 false 1.031,0.573 1.25,0.771 0.219,0.198 10 false *1
*1 Spacer


Remove the bolt, spacer and transmission revolution sensor (NC) from the counter drive gear sub-assembly.


Hide 35111C 14.REMOVE TRANSAXLE HOUSING

a.
C369221

Remove the 20 bolts.


b.
C369222

Using a plastic hammer, tap on the circumference of the transaxle housing to remove it from the automatic transaxle case sub-assembly.


c.
C369225C01
2.979,0.542 3.208,0.74 0.229,0.198 10 false *1 3.063,0.802 3.292,1 0.229,0.198 10 false *1 3.063,1.083 3.292,1.281 0.229,0.198 10 false *1 3.021,1.5 3.25,1.698 0.229,0.198 10 false *1 1.854,0.021 2.052,0.208 0.198,0.188 10 false *1 0.594,0.365 0.792,0.552 0.198,0.188 10 false *2
*1 Transaxle Case Gasket
*2 O-ring


Remove the 5 transaxle case gaskets from the front oil pump assembly.


d.

Remove the O-ring from the automatic transaxle case sub-assembly.


Hide 35174 15.REMOVE TRANSAXLE HOUSING OIL SEPARATOR

a.
C369689

Remove the 3 bolts and transaxle housing oil separator from the transaxle housing.


Hide 35394 16.REMOVE TRANSMISSION OIL CLEANER MAGNET

a.
C369690

Remove the 3 transmission oil cleaner magnets from the transaxle housing oil separator.


Hide 35394 17.INSPECT TRANSMISSION OIL CLEANER MAGNET

Hide 35882C 18.REMOVE DIFFERENTIAL GEAR LUBE APPLY TUBE

a.
C369691

Remove the differential gear lube apply tube from the transaxle housing.


Hide 35847C 19.REMOVE TRANSMISSION LUBE APPLY TUBE

a.
C369692

Remove the bolt and clamp from the transaxle housing.


b.
C369693

Remove the transmission lube apply tube from the transaxle housing.


Hide 20.REMOVE DIFFERENTIAL CASE ASSEMBLY

a.
C369696

Remove the differential case assembly from the automatic transaxle case sub-assembly.


Hide 35617F 21.REMOVE CLUTCH DRUM OIL SEAL RING

a.
C369697

Remove the clutch drum oil seal ring from the front oil pump assembly.


Hide 35354 22.REMOVE OIL PUMP SPROCKET FRONT THRUST WASHER

a.
C369698

Remove the oil pump sprocket front thrust washer from the transmission oil pump drive sprocket.


Hide 35781C 23.REMOVE TRANSMISSION DRIVE CHAIN

a.
C369699

Remove the transmission drive chain together with the transmission oil pump drive sprocket and oil pump drive shaft sub-assembly from the front oil pump assembly.

NOTICE:

To avoid damaging the bush of the front oil pump assembly, remove the transmission drive chain, transmission oil pump drive sprocket and oil pump drive shaft sub-assembly horizontally relative to the front oil pump assembly.



Hide 35355 24.REMOVE OIL PUMP SPROCKET REAR THRUST WASHER

a.
C369700

Remove the oil pump sprocket rear thrust washer from the front oil pump assembly.


Hide 35409D 25.REMOVE MANUAL DETENT SPRING SUB-ASSEMBLY

a.
C369701

Remove the bolt and manual detent spring sub-assembly from the front oil pump assembly.


Hide 26.REMOVE FRONT OIL PUMP ASSEMBLY

NOTICE:

To avoid damaging the front oil pump assembly and transmission valve body assembly, when removing the front oil pump assembly, first remove the transmission valve body assembly.


a.
C369702

Remove the 7 bolts and front oil pump assembly from the automatic transaxle case sub-assembly.


Hide 35737 27.REMOVE PLANETARY CARRIER THRUST WASHER

a.
C369707

Remove the planetary carrier thrust washer from the C-3 and C-4 clutch assembly.


Hide 34610 28.REMOVE C-3 AND C-4 CLUTCH ASSEMBLY

a.
C369708

Remove the C-3 and C-4 clutch assembly from the front planetary gear assembly.


Hide 35738 31.REMOVE NO. 2 PLANETARY CARRIER THRUST WASHER

a.
C369968

Remove the No. 2 planetary carrier thrust washer from the front planetary gear assembly.


Hide 35719B 32.REMOVE PLANETARY SUN GEAR

a.
C369970

Remove the planetary sun gear from the front planetary gear assembly.


Hide 35779A 33.REMOVE NO. 9 THRUST BEARING RACE

a.
C369972

Remove the No. 9 thrust bearing race from the front planetary gear assembly.


Hide 35778A 34.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C369973

Remove the thrust needle roller bearing from the front planetary gear assembly.


Hide 35778 35.REMOVE NO. 8 THRUST BEARING RACE

a.
C369975

Remove the No. 8 thrust bearing race from the front planetary gear assembly.


Hide 35720 36.REMOVE FRONT PLANETARY GEAR ASSEMBLY

a.
C369976

Remove the front planetary gear assembly from the front planetary ring gear.


Hide 37.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C369977

Remove the thrust needle roller bearing from the front planetary ring gear.


Hide 35777 38.REMOVE NO. 7 THRUST BEARING RACE

a.
C369979

Remove the No. 7 thrust bearing race from the front planetary gear assembly.


Hide 35712E 40.REMOVE INPUT SHAFT OIL SEAL RING

a.
C369981

Remove the 5 input shaft oil seal rings from the front planetary gear assembly.

NOTICE:

Do not expand the gap of the input shaft oil seal rings excessively.



Hide 35749B 41.REMOVE REAR INPUT SHAFT OIL SEAL RING

a.
C369982

Remove the 2 rear input shaft oil seal rings from the front planetary gear assembly.

NOTICE:

Do not expand the gap of the rear input shaft oil seal rings excessively.



Hide 35743 42.REMOVE FRONT PLANETARY RING GEAR

a.
C369983

Remove the front planetary ring gear with front planetary ring gear flange from the C-1 clutch assembly.


b.
C369984

Using a screwdriver with its tip wrapped with protective tape, remove the snap ring from the front planetary ring gear.

NOTICE:

Be careful not to damage the front planetary ring gear and front planetary ring gear flange.



c.
C369985

Remove the front planetary ring gear flange from the front planetary ring gear.


Hide 43.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C369987

Remove the thrust needle roller bearing from the C-1 clutch assembly.


Hide 44.REMOVE NO. 6 THRUST BEARING RACE

a.
C369989

Remove the No. 6 thrust bearing race from the C-1 clutch assembly.


Hide 45.REMOVE C-1 CLUTCH ASSEMBLY

a.
C369991

Remove the C-1 clutch assembly from the counter drive gear sub-assembly.


Hide 35707D 47.REMOVE REAR PLANETARY SUN GEAR SUB-ASSEMBLY

a.
C370368

Remove the No. 3 thrust bearing race from the rear planetary sun gear sub-assembly.


b.
C370370N01
0.833,0.844 0.635,0.604 0.635,0.604 0.875,0.708 true 0.344,0.521 0.698,0.719 0.354,0.198 10 false SST

Using SST and a press, remove the rear planetary sun gear sub-assembly from the C-1 clutch assembly.

SST
09950-60010  (09951-00260)
09950-70010  (09951-07200)


c.
C370372

Remove the planetary sun gear sub-assembly from the rear planetary sun gear sub-assembly.


d.
C370373

Remove the No. 4 thrust bearing race from the rear planetary sun gear sub-assembly.


e.
C370374

Remove the thrust needle roller bearing from the rear planetary sun gear sub-assembly.


f.
C370376

Remove the thrust bearing race from the rear planetary sun gear sub-assembly.


Hide 35706V 48.INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY

Hide 35707D 49.INSPECT REAR PLANETARY SUN GEAR SUB-ASSEMBLY

Hide 50.REMOVE C-1 CLUTCH ASSEMBLY

a.
C370377

Remove the C-1 clutch assembly from the sun gear input hub sub-assembly.


Hide 51.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C370378

Remove the thrust needle roller bearing from the sun gear input hub sub-assembly.


Hide 35775K 52.REMOVE NO. 5 THRUST BEARING RACE

a.
C370380

Remove the No. 5 thrust bearing race from the sun gear input hub sub-assembly.


Hide 53.REMOVE TOLERANCE RING

a.
C370437

Using a screwdriver with its tip wrapped in protective tape, remove the tolerance ring from the clutch drum sub-assembly.

NOTICE:

Be careful not to damage the clutch drum sub-assembly.



Hide 35633 54.REMOVE FRONT CLUTCH CLUTCH DISC

a.
C370439

Using a screwdriver with its tip wrapped in protective tape, remove the snap ring from the clutch drum sub-assembly.

NOTICE:

Be careful not to damage the clutch drum sub-assembly.



b.
C370440C01
1.844,0.208 2.083,0.313 false 1.646,1.49 2.01,1.49 false 1.833,2.479 1.833,1.01 1.833,1.01 2.021,1.01 false 1.833,1.979 2.031,1.979 false 1.833,2.479 2.031,2.479 false 3.229,2.646 3.229,0.708 3.229,0.708 3.031,0.708 false 3.031,1.208 3.229,1.208 false 3.021,1.688 3.229,1.688 false 3.021,2.167 3.229,2.167 false 1.688,0.125 2,0.281 0.313,0.156 10 false *1 3.167,2.646 3.375,2.833 0.208,0.188 10 false *2 1.5,1.406 1.781,1.594 0.281,0.188 10 false *3 1.01,0.323 1.323,0.479 0.313,0.156 10 false *a 1.01,0.969 1.323,1.125 0.313,0.156 10 false *b
*1 Forward Clutch Flange
*2 Front Clutch Clutch Disc
*3 Forward Multiple Disc Clutch Clutch Plate
*a Snap Ring Side
*b Front Clutch Clutch Disc Side


Remove the forward clutch flange, 4 front clutch clutch discs and 4 forward multiple disc clutch clutch plates from the clutch drum sub-assembly.


Hide 35668 56.REMOVE NO. 1 CLUTCH BALANCER

a.
C370441N01
0.438,0.792 0.792,1.042 true 2.521,1.625 2.781,1.531 true 0.135,0.719 0.594,0.917 0.458,0.198 10 false SST 2.219,1.563 2.531,1.75 0.313,0.188 10 true SST

Place SST on the No. 1 clutch balancer and compress the rear clutch piston return compression spring with a press.

SST
09320-89010  

NOTICE:

Do not compress the rear clutch piston return compression spring excessively.



b.

Using SST, remove the snap ring from the clutch drum sub-assembly.

SST
09350-30020  (09350-07070)


c.
C370442

Remove the No. 1 clutch balancer from the forward clutch piston.


Hide 35650B 57.REMOVE REAR CLUTCH PISTON RETURN COMPRESSION SPRING

a.
C370443

Remove the rear clutch piston return compression spring from the forward clutch piston.


Hide 35612B 58.REMOVE FORWARD CLUTCH PISTON

a.
C376898

Set the front planetary gear assembly on the clutch drum sub-assembly.


b.
C376899C01
0,0 0,0 false
V100135

Cover Oil Hole


Apply compressed air (392 kPa (4.0 kgf/cm2, 57 psi)) to the oil hole of the front planetary gear assembly to separate the forward clutch piston from the clutch drum sub-assembly.

NOTICE:

Be careful as ATF may spray when applying compressed air.


HINT:

Make sure to cover the ATF hole shown in the illustration.



c.
C370446

Remove the forward clutch piston from the clutch drum sub-assembly.


d.
C370447

Remove the O-ring from the clutch drum sub-assembly.


e.
C370448

Remove the D-ring from the clutch drum sub-assembly.


Hide 35506 59.REMOVE MANUAL VALVE LEVER SHAFT SUB-ASSEMBLY

a.
C370450

Remove the bolt.


b.
C370451

Align the cutouts of the manual valve lever sub-assembly and manual valve lever shaft sub-assembly, and remove the manual valve lever shaft sub-assembly.

HINT:

Rotating the manual valve lever shaft sub-assembly to the area shown in the illustration will align the cutouts.



c.
C362453

Remove the O-ring from the manual valve lever shaft sub-assembly.


Hide 35505 60.REMOVE MANUAL VALVE LEVER SUB-ASSEMBLY

a.
C370453

Remove the manual valve lever sub-assembly from the automatic transaxle case sub-assembly.


Hide 35596 61.REMOVE PAWL STOPPER PLATE

a.
C370454

Remove the 2 bolts and pawl stopper plate from the automatic transaxle case sub-assembly.


Hide 35506J 62.REMOVE MANUAL VALVE LEVER SHAFT RETAINER SPRING

a.
C370455

Remove the manual valve lever shaft retainer spring from the automatic transaxle case sub-assembly.


Hide 35501 63.REMOVE PARKING LOCK ROD SUB-ASSEMBLY

a.

Move the manual valve lever shaft sub-assembly and parking lock rod sub-assembly as shown in the illustration, and remove the parking lock rod sub-assembly.

C370456C01
6.094,1.948 6.177,1.854 6.177,1.854 6.323,1.854 false 5.979,2.167 6.021,2.406 6.021,2.406 6.167,2.406 false 6.365,1.771 6.677,1.927 0.313,0.156 10 false *1 6.198,2.313 6.51,2.469 0.313,0.156 10 false *2
*1 Manual Valve Lever Shaft Sub-assembly *2 Parking Lock Rod Sub-assembly


HINT:

Align the cutouts of the parking lock rod sub-assembly and manual valve lever shaft sub-assembly and remove the parking lock rod sub-assembly.



Hide 35506 64.REMOVE MANUAL VALVE LEVER SHAFT SUB-ASSEMBLY

a.
C370458

Remove the manual valve lever shaft sub-assembly from the automatic transaxle case sub-assembly.


Hide 35557A 65.REMOVE PARKING LOCK PAWL TORSION SPRING

a.
C370459

Remove the parking lock pawl torsion spring from the automatic transaxle case sub-assembly.


Hide 35556 66.REMOVE PARKING LOCK PAWL SHAFT

a.
C370460

Remove the parking lock pawl shaft from the automatic transaxle case sub-assembly.


Hide 35557 67.REMOVE PARKING LOCK PAWL

a.
C370461

Remove the parking lock pawl from the automatic transaxle case sub-assembly.


Hide 35598 68.REMOVE PARKING LOCK SLEEVE

a.
C370462

Remove the parking lock sleeve from the automatic transaxle case sub-assembly.


Hide 35704C 70.REMOVE COUNTER DRIVE GEAR SUB-ASSEMBLY

a.
C377662C01
0,0 0,0 false
V100135

"TORX" Bolt
V100136

Bolt


Using a T50 "TORX" socket wrench, remove the 2 "TORX" bolts from the counter drive gear sub-assembly.


b.

Remove the 5 bolts from the counter drive gear sub-assembly.


c.
C370695

Remove the counter drive gear sub-assembly together with the pinion and counter driven gear sub-assembly from the automatic transaxle case sub-assembly.


d.
C370696

Remove the O-ring from the automatic transaxle case sub-assembly.


Hide 35681C 71.REMOVE NO. 1 BRAKE DISC

a.
C370697

Using a screwdriver with its tip wrapped in protective tape, remove the snap ring from the counter drive gear sub-assembly.

NOTICE:

Be careful not to damage the counter drive gear sub-assembly.



b.
C370699C01
1.833,0.156 2.01,0.26 false 1.521,1.865 1.948,1.865 false 1.802,0.781 1.802,2.458 1.802,2.458 1.948,2.458 false 1.802,0.781 1.958,0.781 false 1.802,1.333 1.948,1.333 false 3.25,2.969 3.25,1.042 3.25,1.042 3.094,1.042 false 3.094,1.625 3.25,1.625 false 3.094,2.177 3.25,2.177 false 3.094,2.74 3.25,2.74 false 1.677,0.083 1.99,0.24 0.313,0.156 10 false *1 1.365,1.792 1.677,1.948 0.313,0.156 10 false *2 3.177,2.99 3.396,3.177 0.219,0.188 10 false *3 1.031,0.344 1.344,0.5 0.313,0.156 10 false *a 1.021,1.01 1.333,1.167 0.313,0.156 10 false *b
*1 No. 1 Brake Flange
*2 No. 1 Brake Disc
*3 No. 1 Brake Plate
*a Snap Ring Side
*b No. 1 Brake Disc Side


Remove the No. 1 brake flange, 4 No. 1 brake discs and 4 No. 1 brake plates from the counter drive gear sub-assembly.


Hide 35739 73.REMOVE NO. 3 PLANETARY CARRIER THRUST WASHER

a.
C370700

Remove the No. 3 planetary carrier thrust washer from the rear planetary gear assembly.


Hide 35760 74.REMOVE REAR PLANETARY GEAR ASSEMBLY

a.
C370702

Remove the rear planetary gear assembly from the C-2 clutch assembly.


Hide 35729B 75.REMOVE NO. 4 PLANETARY CARRIER THRUST WASHER

a.
C374490

Remove the No. 4 planetary carrier thrust washer from the rear planetary gear assembly.


Hide 77.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C370705

Remove the thrust needle roller bearing from the C-2 clutch assembly.


Hide 35787C 78.REMOVE NO. 2 THRUST BEARING RACE

a.
C370707

Remove the No. 2 thrust bearing race from the C-2 clutch assembly.


Hide 80.REMOVE C-2 CLUTCH ASSEMBLY

a.
C370708

Remove the C-2 clutch assembly from the automatic transaxle case sub-assembly.


Hide 81.REMOVE THRUST NEEDLE ROLLER BEARING

a.
C370709

Remove the thrust needle roller bearing from the C-2 clutch assembly.


Hide 35786A 82.REMOVE NO. 1 THRUST BEARING RACE

a.
C370711

Remove the No. 1 thrust bearing race from the automatic transaxle case sub-assembly.


Hide 35667B 83.REMOVE NO. 2 CLUTCH DISC

a.
C370713

Using a screwdriver with its tip wrapped in protective tape, remove the snap ring from the intermediate shaft sub-assembly.

NOTICE:

Be careful not to damage the intermediate shaft sub-assembly.



b.
C370714C01
1.813,0.177 2.083,0.26 false 1.844,2.583 1.844,0.979 1.844,0.979 2.01,0.979 false 1.646,1.531 2.01,1.531 false 1.844,2.063 2.01,2.063 false 1.844,2.583 2.01,2.583 false 3.24,2.656 3.24,0.708 3.24,0.708 3.083,0.708 false 3.083,1.25 3.24,1.25 false 3.083,1.771 3.24,1.771 false 3.083,2.313 3.24,2.313 false 1.656,0.094 1.969,0.25 0.313,0.156 10 false *1 3.177,2.688 3.406,2.875 0.229,0.188 10 false *2 1.5,1.469 1.813,1.625 0.313,0.156 10 false *3 0.948,0.333 1.26,0.49 0.313,0.156 10 false *a 0.948,1.01 1.26,1.167 0.313,0.156 10 false *b
*1 Direct Clutch Flange
*2 No. 2 Clutch Disc
*3 No. 2 Clutch Plate
*a Snap Ring Side
*b No. 2 Clutch Disc Side


Remove the direct clutch flange, 4 No. 2 clutch discs and 4 No. 2 clutch plates from the intermediate shaft sub-assembly.


Hide 35698A 85.REMOVE C-2 CLUTCH BALANCER

a.
C370715N01
0.99,0.927 1.198,0.927 false 2.719,1.635 3.063,1.313 false 1.24,0.854 1.594,1.052 0.354,0.198 10 false SST 2.417,1.573 2.771,1.771 0.354,0.198 10 false SST

Place SST on the C-2 clutch balancer and compress the clutch return spring sub-assembly with a press.

SST
09387-00020  

NOTICE:

Do not compress the clutch return spring sub-assembly excessively.



b.

Using SST, remove the snap ring from the intermediate shaft sub-assembly.

SST
09350-30020  (09350-07070)


c.
C370716

Remove the C-2 clutch balancer from the intermediate shaft sub-assembly.


Hide 35608N 86.REMOVE CLUTCH RETURN SPRING SUB-ASSEMBLY

a.
C370717

Remove the clutch return spring sub-assembly from the intermediate shaft sub-assembly.


Hide 35608N 87.INSPECT CLUTCH RETURN SPRING SUB-ASSEMBLY

Hide 35652E 88.REMOVE C-2 CLUTCH PISTON

a.
C370719C01
0,0 0,0 false
V100135

Apply Compressed Air
V100136

Cover Oil Hole


Apply compressed air (392 kPa (4.0 kgf/cm2, 57 psi)) to the oil hole of the intermediate shaft sub-assembly.

NOTICE:
·

Applying compressed air may cause the C-2 clutch piston to jump out. When removing the C-2 clutch piston, hold it by hand using a piece of cloth.

·

Be careful as ATF may spray when applying compressed air.



HINT:

Cover all of the oil holes with tape except the oil hole to which compressed air will be applied.



b.
C370720

Remove the C-2 clutch piston from the intermediate shaft sub-assembly.


c.
C370721

Remove the 2 O-rings from the intermediate shaft sub-assembly.


Hide 35653B 89.REMOVE DIRECT CLUTCH DRUM OIL SEAL RING

a.
C371067

Remove the 2 direct clutch drum oil seal rings from the automatic transaxle case sub-assembly.


Hide 35682 91.REMOVE 2ND BRAKE BRAKE DISC

a.
C371068

Using a screwdriver with its tip wrapped with protective tape, remove the snap ring from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



b.
C371070C01
1.938,0.177 2.198,0.302 false 1.823,1.781 2.188,1.781 false 2.01,2.656 2.01,0.896 2.01,0.896 2.198,0.896 false 2.01,2.208 2.188,2.208 false 2.021,2.656 2.198,2.656 false 2.01,1.333 2.188,1.333 false 3.094,0.656 3.25,0.656 3.25,0.656 3.25,2.729 false 3.094,1.104 3.25,1.104 false 3.094,1.573 3.25,1.573 false 3.094,2 3.25,2 false 3.094,2.438 3.25,2.438 false 1.781,0.094 2.094,0.25 0.313,0.156 10 false *1 3.177,2.75 3.406,2.938 0.229,0.188 10 false *2 1.667,1.719 1.979,1.875 0.313,0.156 10 false *3 0.969,0.438 1.281,0.594 0.313,0.156 10 false *a 0.969,1.094 1.281,1.25 0.313,0.156 10 false *b
*1 2nd Brake Brake Flange
*2 2nd Brake Brake Disc
*3 2nd Brake Brake Plate
*a Snap Ring Side
*b 2nd Brake Brake Disc Side


Remove the 2nd brake brake flange, 5 2nd brake brake discs and 5 2nd brake brake plates from the automatic transaxle case sub-assembly.


Hide 35623P 93.REMOVE NO. 2 1ST AND REVERSE BRAKE PISTON

a.
C371071

Remove the No. 2 1st and reverse brake piston from the automatic transaxle case sub-assembly.


Hide 35068 94.REMOVE 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

a.
C371072N01
2.042,1.219 2.75,0.885 2.75,0.885 1.719,1.021 true 2.802,0.813 3.198,1.021 0.396,0.208 10 false SST

Place SST on the 1st and reverse brake return spring sub-assembly and compress it with a press.

SST
09380-60011  (09381-06020, 09381-06050, 09381-06070)
09950-70010  (09951-07200)

NOTICE:

Do not compress the 1st and reverse brake return spring sub-assembly excessively.



b.
C371073

Using a screwdriver with its tip wrapped with protective tape, remove the snap ring from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



c.
C371075

Remove the 1st and reverse brake return spring sub-assembly from the automatic transaxle case sub-assembly.


Hide 35068 95.INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

Hide 35623H 96.REMOVE 1ST AND REVERSE BRAKE PISTON

a.
C374492

Apply compressed air (approximately 392 kPa (4.0 kgf/cm2, 57 psi)) to the ATF hole to remove the 1st and reverse brake piston from the automatic transaxle case sub-assembly.


b.
C362514

Remove the 2 O-rings from the 1st and reverse brake piston.


Hide 97.REMOVE MANUAL VALVE LEVER SHAFT OIL SEAL

a.
C371553

Using a screwdriver with its tip wrapped with protective tape, remove the manual valve lever shaft oil seal from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



Hide 98.REMOVE TRANSAXLE CASE OIL SEAL

a.
C371555N01
2.146,1.073 2.51,1.073 false 2.563,0.99 2.927,1.198 0.365,0.208 10 false SST

Using SST, remove the transaxle case oil seal from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.



Hide 43410M 99.REMOVE FRONT DRIVE SHAFT OIL SEAL RH

a.
C371557N01
0.635,0.958 0.979,0.958 false 0.344,0.885 0.677,1.073 0.333,0.188 10 false SST

Using SST, remove the front drive shaft oil seal RH from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.



Hide 43420H 100.REMOVE FRONT DRIVE SHAFT OIL SEAL LH

a.
C371559N01
2.573,1.677 2.896,1.677 false 2.927,1.594 3.302,1.802 0.375,0.208 10 false SST

Using SST, remove the front drive shaft oil seal LH from the automatic transaxle case sub-assembly.

SST
09308-36010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.



Hide 35605C 101.REMOVE NEEDLE ROLLER BEARING

a.
C371561N01
2.094,2.552 3.031,1.76 3.031,1.76 1.99,1.969 true 3.073,1.677 3.417,1.885 0.344,0.208 10 false SST

Using SST and a press, remove the needle roller bearing from the transaxle housing.

SST
09950-60010  (09951-00550)
09950-70010  (09951-07200)

NOTICE:

Be careful not to damage the transaxle housing.



Hide 102.REMOVE COUNTER DRIVEN GEAR REAR TAPERED ROLLER BEARING (OUTER RACE)

a.
C371563N01
2.052,0.917 2.385,0.917 false 2.417,0.833 2.771,1.042 0.354,0.208 10 false SST

Using SST, remove the counter driven gear rear tapered roller bearing (outer race) from the automatic transaxle case sub-assembly.

SST
09308-36010  

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.


HINT:
C371564

Align the claw of the SST with the indentation of the automatic transaxle case sub-assembly when removing the parts.



Hide 103.REMOVE COUNTER DRIVEN GEAR REAR TAPERED ROLLER BEARING (INNER RACE)

a.
C371566N01
1.396,0.479 1.531,0.479 1.531,0.479 1.667,0.958 false 2.198,1.76 2.76,2.094 true 1.094,0.406 1.438,0.604 0.344,0.198 10 false SST 2.802,2.021 3.146,2.219 0.344,0.198 10 false SST

Using SST, remove the counter driven gear rear tapered roller bearing (inner race) from the pinion and counter driven gear sub-assembly.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09950-60010  (09951-00310)

NOTICE:

Because SST is attached to the roller portion, there is a possibility that the roller portion could break and SST could come off before the counter driven gear rear tapered roller bearing (inner race) comes off.



b.
C371567N01
1.427,0.396 1.583,0.396 1.583,0.396 1.646,0.76 false 2.167,1.719 2.719,1.896 true 1.135,0.323 1.51,0.531 0.375,0.208 10 false SST 2.76,1.833 3.135,2.042 0.375,0.208 10 false SST

If the roller portion breaks and SST comes off, reattach SST to the inner race in the position shown in the illustration, and continue removing the parts.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04010, 09955-04011, 09957-04010, 09958-04011)
09950-60010  (09951-00310)


Hide 104.REMOVE COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING (OUTER RACE)

a.
C371569N01
1.479,0.844 1.927,0.844 false 1.969,0.76 2.427,0.958 0.458,0.198 10 false SST

Using SST, remove the counter driven gear front tapered roller bearing (outer race) and pinion and counter driven gear shim from the transaxle housing.

SST
09308-36010  

NOTICE:

Be careful not to damage the transaxle housing.


HINT:
C371570

Align the claw of the SST with the indentation of the transaxle housing when removing the parts.



Hide 105.REMOVE COUNTER DRIVEN GEAR FRONT TAPERED ROLLER BEARING (INNER RACE)

a.
C362542N01
1.771,0.906 2.083,0.552 false 1.656,2.271 1.99,2.417 false 0.51,2.573 1.083,1.979 true 2.156,0.469 2.615,0.667 0.458,0.198 10 false SST 2.063,2.344 2.521,2.542 0.458,0.198 10 false SST 0.177,2.49 0.635,2.688 0.458,0.198 10 false SST

Using SST, remove the counter driven gear front tapered roller bearing (inner race) from the pinion and counter driven gear sub-assembly.

SST
09950-00020  
09950-00030  
09950-60010  (09951-00380)


Hide 106.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (OUTER RACE)

Hide 107.REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING (INNER RACE)

Hide 108.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (OUTER RACE)

Hide 109.REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING (INNER RACE)

Hide 35104Q 110.REMOVE NO. 1 TRANSAXLE CASE PLUG

a.
C371573

Remove the 4 No. 1 transaxle case plugs from the automatic transaxle case sub-assembly.


b.
C371574

Remove the 4 No. 1 transaxle case plugs from the transaxle housing.


c.
C362546

Remove the 8 O-rings from the 8 No. 1 transaxle case plugs.


Hide 35104R 111.REMOVE NO. 2 TRANSAXLE CASE PLUG

a.
C371575

Using a 6 mm socket hexagon wrench, remove the 3 No. 2 transaxle case plugs and 3 gaskets from the automatic transaxle case sub-assembly.


b.
C371576

Using a 6 mm socket hexagon wrench, remove the 3 No. 2 transaxle case plugs and 3 gaskets from the transaxle housing.


Hide 35101E 112.REMOVE AUTOMATIC TRANSMISSION CASE STRAIGHT PIN

NOTICE:

It is not necessary to remove the automatic transmission case straight pins unless they are being replaced.


a.
C371577

Remove the 2 automatic transmission case straight pins from the automatic transaxle case sub-assembly.


Hide 35104B 113.REMOVE NO. 1 BREATHER PLUG (ATM)

a.
C371579C01
0.906,0.573 1.146,0.781 0.24,0.208 10 false *a
*a Push


Disengage each claw and remove the No. 1 breather plug (ATM) from the automatic transaxle case sub-assembly.

NOTICE:

Be careful not to damage the automatic transaxle case sub-assembly.