CHECK DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start* / Trouble Codes.
*: w/ Smart Entry and Start System
Check the details of the DTCs.
Click herePower Source / Network>NETWORKING>LIN COMMUNICATION SYSTEM>DIAGNOSTIC TROUBLE CODE CHART
CLEAR DTC
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body or Entry&Start* / Trouble Codes.
*: w/ Smart Entry and Start System
Clear the DTCs.