87810
1.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/o Pre-collision System)
|
Install in this Direction |
Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
Connect the connector.
87834
2.INSTALL INNER REAR VIEW MIRROR STAY HOLDER COVER (w/o Pre-collision System)
|
Install in this Direction |
Engage the 6 claws to install the inner rear view mirror stay holder cover as shown in the illustration.
|
Slide |
Slide the inner rear view mirror stay holder cover as shown in the illustration and engage the 2 guides.
87810
3.INSTALL INNER REAR VIEW MIRROR ASSEMBLY (w/ Pre-collision System)
|
Install in this Direction |
Slide and temporarily install the inner rear view mirror assembly as shown in the illustration.
Using a T20 "TORX" socket wrench, install the inner rear view mirror assembly with the screw.
Engage the clamp.
Connect the connector.
86466D
4.INSTALL NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)
86466E
5.INSTALL NO. 2 FORWARD RECOGNITION COVER (w/ Pre-collision System)