Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM33A0E _51 Engine / Hybrid System _065332 2GR-FKS ENGINE CONTROL _0326378 VACUUM SWITCHING VALVE(for Engine Mounting) A

2GR-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  REMOVAL  


PROCEDURE

Hide 53295E 1.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 17750A 2.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 3.REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17650H 4.REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.
A405624

Remove the bolt and disengage the wire harness clamp to separate the engine wire.


b.
A405623

Remove the 2 bolts.


c.

Disengage the wire harness clamp and disconnect the vacuum switching valve (for active control engine mount system) connector.


d.
A405625

Disconnect the 3 vacuum hoses from the vacuum switching valve (for active control engine mount system).


e.

Remove the nut and vacuum switching valve (for active control engine mount system) from the front engine mounting insulator.