Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › 2017.09–2017.12
RM33A0E _52 Drivetrain _065352 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0326587 PARK / NEUTRAL POSITION SWITCH G

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.SECURE VEHICLE

a.

Fully apply the parking brake and chock a wheel.

CAUTION:
C332327

·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 84540 2.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION

a.

Turn the engine switch on (IG).


b.

Depress the brake pedal and check that the engine can be started when the shift lever is in N or P, but cannot be started in any other position.


c.

Check that the back-up lights come on when the shift lever is moved to R, but do not come on with the shift lever in any other position.

If the operation is not as specified, check the park/neutral position switch assembly.

Click hereDrivetrain>UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE)>PARK / NEUTRAL POSITION SWITCH>ADJUSTMENT