Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER KNOB
RM33A0E _52 Drivetrain _065352 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0326590 SHIFT LEVER KNOB A

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER KNOB  INSTALLATION  


PROCEDURE

Hide 33504F 1.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

a.
C370836

Install the shift lever knob sub-assembly to the transmission floor shift assembly.


b.
C370837

Engage the 2 claws to connect the shifting hole cover sub-assembly as shown in the illustration.

NOTICE:

Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.