84523
1.INSTALL NO. 1 SWITCH WIRE
Perform this procedure only when replacement of the No. 1 switch wire is necessary.
Engage the 2 guides to install the No. 1 switch wire to the steering wheel assembly.
84610F
2.INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the 2 shift paddle switches (transmission shift switch assemblies) to the No. 1 switch wire.
Engage the 2 clamps.
Engage the 4 claws to install the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.
Install 2 new screws.
84250A
3.INSTALL STEERING PAD SWITCH ASSEMBLY
45100
4.INSTALL STEERING WHEEL ASSEMBLY