Home › Vehicle Exterior › HORN › HORN › 2017.09–2017.12
RM33A0E _59 Vehicle Exterior _065396 HORN _0326908 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY (w/o Level Warning Switch Assembly)

a.
E331514C02
1.031,0.219 1.375,0.26 false 1.26,0.99 1.719,0.802 false 0.094,0.083 0.417,0.302 0.323,0.219 10 false *a 0.844,0.125 1.198,0.417 0.354,0.292 10 false *b 1.781,0.719 2.031,1.031 0.25,0.313 10 false 1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body Ground


Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 2.INSPECT LOW PITCHED HORN ASSEMBLY (w/o Level Warning Switch Assembly)

a.
E331515C03
1.094,0.281 1.385,0.302 false 1.281,1.031 1.75,0.74 false 0.083,0.125 0.417,0.396 0.333,0.271 10 false *a 0.885,0.177 1.24,0.417 0.354,0.24 10 false *b 1.813,0.635 2.042,0.927 0.229,0.292 10 false 1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body Ground


Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.


Hide 86510 3.INSPECT HIGH PITCHED HORN ASSEMBLY (w/ Level Warning Switch Assembly)

a.
E372462C01
1.031,1.375 1.594,1.625 false 1.052,0.292 1.354,0.417 false 0.125,0.073 0.438,0.271 0.313,0.198 10 false *a 0.823,0.167 1.135,0.365 0.313,0.198 10 false *b 1.656,1.563 1.969,1.76 0.313,0.198 10 false 1
*a Component without harness connected
(High Pitched Horn Assembly)
*b Body Ground


Apply battery voltage and check the operation of the high pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the high pitched horn assembly.


Hide 86520 4.INSPECT LOW PITCHED HORN ASSEMBLY (w/ Level Warning Switch Assembly)

a.
E372463C01
1.052,0.292 1.354,0.427 false 1.031,1.385 1.448,1.656 false 0.115,0.083 0.427,0.281 0.313,0.198 10 false *a 0.844,0.167 1.156,0.365 0.313,0.198 10 false *b 1.521,1.646 1.833,1.844 0.313,0.198 10 false 1
*a Component without harness connected
(Low Pitched Horn Assembly)
*b Body Ground


Apply battery voltage and check the operation of the low pitched horn assembly according to the table below.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Body ground
Horn sounds


If the result is not as specified, replace the low pitched horn assembly.