Home › Vehicle Exterior › DOOR / HATCH › LUGGAGE COMPARTMENT DOOR SUPPORT › 2017.09–2021.02
RM33A0E _59 Vehicle Exterior _065392 DOOR / HATCH _0326920 LUGGAGE COMPARTMENT DOOR SUPPORT A

DOOR / HATCH  LUGGAGE COMPARTMENT DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

If the luggage compartment door support assembly is removed, the luggage compartment door will slam shut. Make sure to support the luggage compartment door by hand when it is open and when opening and closing it.


PROCEDURE

Hide 64770 1.REMOVE SPARE WHEEL COVER ASSEMBLY

a.
B471688

Remove the spare wheel cover assembly.


Hide 64779E 2.REMOVE SPARE WHEEL COVER TRAY

a.
B471689

Remove the spare wheel cover tray.


Hide 64725D 3.REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

a.
B471737C01
0,0 0,0 false
V100135

Push


Disengage the claw and guide to remove the No. 1 luggage compartment trim hook as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



Hide 64749E 4.REMOVE LUGGAGE COMPARTMENT DOOR STRIKER COVER

a.
B471727C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 2 claws to remove the luggage compartment door striker cover as shown in the illustration.


Hide 58387 5.REMOVE REAR FLOOR FINISH PLATE

a.
B471690

Remove the 4 clips.


b.
B471691C01
0,0 0,0 false
V113147

Remove in this Direction


Disengage the 4 claws and 8 guides to remove the rear floor finish plate as shown in the illustration.


Hide 64721 6.REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER RH

a.
B471692C02
2.146,1.938 2.365,2.125 0.219,0.188 10 true *a 2.49,0.271 2.802,0.427 0.313,0.156 10 false *b
*a Clip A
*b Clip B


Using a clip remover, remove the clip (A).


b.

Remove the clip (B).


c.
B471693C03
1.073,1.583 1.073,1.094 true 0.979,1.583 1.229,1.792 0.25,0.208 12 true *A
*A w/ Fastener
V100155

Fastener


Disengage each fastener to remove the luggage compartment trim inner cover RH.


Hide 64722 7.REMOVE LUGGAGE COMPARTMENT TRIM INNER COVER LH

a.
B471694C01
0.958,1.917 1.198,2.115 0.24,0.198 10 true *a 0.719,0.219 1.031,0.375 0.313,0.156 10 false *b
*a Clip A
*b Clip B


Using a clip remover, remove the clip (A).


b.

Remove the clip (B).


c.
B471695C05
2.208,1.542 2.208,1.094 true 2.115,1.542 2.396,1.75 0.281,0.208 12 true *A
*A w/ Fastener
V100155

Fastener


Disengage each fastener to remove the luggage compartment trim inner cover LH.


Hide 65776 8.REMOVE BACK DOOR STAY SPRING

a.
B471696

Disengage the 2 guides to remove the back door stay spring.

HINT:

Use the same procedure for the RH side and LH side.



Hide 64519 9.REMOVE LUGGAGE DOOR HINGE SUPPORT BUSH

a.
B471697

Disengage the 2 claws to remove the luggage door hinge support bush.

HINT:

Use the same procedure for the RH side and LH side.



Hide 64530A 10.REMOVE LUGGAGE COMPARTMENT DOOR SUPPORT ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the luggage compartment door support assembly in order to prevent the piston rod from deforming.



a.
B471698C01
2.396,2.854 2.25,2.563 true 2.333,2.865 2.594,3.063 0.26,0.198 10 true *a
*a Protective Tape
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Using a screwdriver with its tip wrapped with protective tape, slightly raise the stop ring as indicated by the arrows, in the order shown in the illustration.

NOTICE:
·

Do not remove the stop rings from the luggage compartment door support assembly. Raise the stop ring just enough to allow the ball joint to be disengaged.

·

Do not reuse the luggage compartment door support assembly if the stop ring has been removed.




b.

Disengage the ball joint.

NOTICE:

Remove the luggage compartment door support assembly while supporting the luggage door by hand.



c.
B471699C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)


Disengage the guide as indicated by the arrows, in the order shown in the illustration to remove the luggage compartment door support assembly.