Home › Vehicle Exterior › DOOR / HATCH › FUEL LID OPENER MOTOR ASSEMBLY
RM33A0E _59 Vehicle Exterior _065392 DOOR / HATCH _0326923 FUEL LID OPENER MOTOR ASSEMBLY A

DOOR / HATCH  FUEL LID OPENER MOTOR ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 77030A 1.INSTALL FUEL LID LOCK WITH MOTOR ASSEMBLY

a.

Apply MP grease to the sliding parts of the fuel lid lock with motor assembly.


b.

Connect the connector.


c.

Engage the claw to install the fuel lid lock with motor assembly.


d.

Engage the clamp.


Hide 77377 2.INSTALL FUEL FILLER OPENING LID LOCK RETAINER

a.
B471710C01
0,0 0,0 false
V113147

Install in this Direction (1)
V113148

Turn in this Direction (2)


Install the fuel filler opening lid lock retainer as indicated by the arrows, the order shown in the illustration.


Hide 64722 3.INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

Hide 58387 4.INSTALL REAR FLOOR FINISH PLATE

Hide 64725D 5.INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

Hide 64779E 6.INSTALL SPARE WHEEL COVER TRAY

Hide 64770 7.INSTALL SPARE WHEEL COVER ASSEMBLY