Home › Vehicle Exterior › DOOR / HATCH › FUEL LID OPENER MOTOR ASSEMBLY
RM33A0E _59 Vehicle Exterior _065392 DOOR / HATCH _0326923 FUEL LID OPENER MOTOR ASSEMBLY G

DOOR / HATCH  FUEL LID OPENER MOTOR ASSEMBLY  INSPECTION  


PROCEDURE

Hide 77030A 1.INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY

a.

Check the operation of the fuel lid lock with motor assembly (motor operation).

i.

Apply battery voltage to the fuel lid lock with motor assembly connector, and check the operation of the fuel lid lock with motor assembly.

B472416C01
3.51,2.271 3.365,2.271 3.365,2.271 3.26,1.771 false 6.677,0.635 6.531,0.635 6.531,0.635 6.458,1.167 false 0.323,1.031 0.635,1.229 0.313,0.198 10 false *a 6.75,0.583 7.073,0.74 0.323,0.156 10 false *d 3.583,2.188 3.896,2.385 0.313,0.198 10 false *c 6.417,1.615 6.729,1.813 0.313,0.198 10 false *b
*a Component without harness connected
(Fuel Lid Lock with Motor Assembly)
*b Shaft Stroke
*c Lever *d Shaft


OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Terminal 2
Shaft not extended


If the result is not as specified, replace the fuel lid lock with motor assembly.



b.

Measure the shaft stroke.

Standard:
Area Condition Specified Condition
Shaft stroke Lever pulled 16.05 mm
(0.632 in.)


If the result is not as specified, replace the fuel lid lock with motor assembly.