Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT › 2017.09–2017.12
RM33A0E _58 Vehicle Interior _065380 LIGHTING (INT) _0326984 PERSONAL LIGHT G

LIGHTING (INT)  PERSONAL LIGHT  INSPECTION  


PROCEDURE

Hide 63605B 1.INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for Normal Roof)

E365826C03
2.552,1.052 2.833,0.563 true 0.875,1.063 0.635,0.604 true 2.323,1.052 2.458,0.573 true 1.104,1.052 1.01,0.583 true 2.813,1.781 2.615,1.385 true 0.74,1.781 0.938,1.385 true 0.219,0.208 0.531,0.406 0.313,0.198 10 false *a 2.792,0.385 3.167,0.583 0.375,0.198 10 false +B1 0.469,0.427 0.844,0.625 0.375,0.198 10 false GND 2.292,0.385 2.76,0.563 0.469,0.177 10 false RLMP 0.854,0.427 1.313,0.625 0.458,0.198 10 false DOOR 2.75,1.813 3.125,2.01 0.375,0.198 10 false ILLB 0.615,1.813 0.99,2.01 0.375,0.198 10 false LILL
*a Component without harness connected
(Map Light (Roof Console Box Sub-assembly))


a.

Inspect the map light LH and map light RH.

i.

Apply battery voltage to the connector and check that the map light LH and map light RH come on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 1 (+B1)
Battery negative (-) → 4 (GND)
Dome light switch off and map light switch LH on Map light LH comes on
Dome light switch off and map light switch RH on Map light RH comes on
Map light switch LH and RH off and dome light switch on Map light LH and RH come on
Battery positive (+) → 1 (+B1)
Battery negative (-) → 3 (DOOR)
Map light switch LH and RH off and door linked switch on Map light LH and RH come on
Map light switch LH and RH off and door linked switch off Map light LH and RH do not come on
Battery positive (+) → 1 (+B1)
Battery negative (-) → 2 (RLMP)
Map light switch LH and RH off Map light LH and RH come on
Map light switch LH and RH on Map light LH and RH do not come on


If the result is not as specified, replace the map light (roof console box sub-assembly).



b.

Inspect the switch illumination and shift lever illumination.

i.

Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 5 (ILLB)
Battery negative (-) → 15 (LILL)
Always Switch illumination and shift lever illumination come on


If the result is not as specified, replace the map light (roof console box sub-assembly).



Hide 63605B 2.INSPECT MAP LIGHT (ROOF CONSOLE BOX SUB-ASSEMBLY) (for Panoramic Moon Roof)

E365825C07
0.531,0.552 0.708,1.125 true 2.375,0.542 2.552,1.115 true 2.906,0.552 2.75,1.125 true 0.521,1.833 0.688,1.406 true 2.927,1.823 2.708,1.406 true 2.313,1.833 2.396,1.406 true 0.198,0.177 0.51,0.333 0.313,0.156 10 false *a 2.729,0.375 3.344,0.573 0.615,0.198 10 false DOOR 2.885,1.854 3.26,2.063 0.375,0.208 10 false GND 0.375,0.375 0.99,0.573 0.615,0.198 10 false +B1 2.177,0.365 2.792,0.563 0.615,0.198 10 false RLMP 0.375,1.844 0.99,2.042 0.615,0.198 10 false ILLB 2.219,1.854 2.667,2.052 0.448,0.198 10 false LILL
*a Component without harness connected
(Map Light (Roof Console Box Sub-assembly))


a.

Inspect the map light LH and map light RH.

i.

Apply battery voltage to the connector and check that the map light LH and map light RH come on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 14 (+B1)
Battery negative (-) → 15 (GND)
Dome light switch off and map light switch LH on Map light LH comes on
Dome light switch off and map light switch RH on Map light RH comes on
Map light switch LH and RH off and dome light switch on Map light LH and RH come on
Battery positive (+) → 14 (+B1)
Battery negative (-) → 1 (DOOR)
Map light switch LH and RH off and door linked switch on Map light LH and RH come on
Map light switch LH and RH off and door linked switch off Map light LH and RH do not come on
Battery positive (+) → 14 (+B1)
Battery negative (-) → 2 (RLMP)
Map light switch LH and RH off Map light LH and RH come on
Map light switch LH and RH on Map light LH and RH do not come on


If the result is not as specified, replace the map light (roof console box sub-assembly).



b.

Inspect the switch illumination and shift lever illumination.

i.

Apply battery voltage to the connector and check that the switch illumination and shift lever illumination come on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 28 (ILLB)
Battery negative (-) → 17 (LILL)
Always Switch illumination and shift lever illumination come on


If the result is not as specified, replace the map light (roof console box sub-assembly).