81360T
1.INSPECT SPOT LIGHT ASSEMBLY (without Rear Seat Armrest Illumination)
| *a | Component without harness connected
(Spot Light Assembly) |
Inspect the spot light LH and spot light RH.
Apply battery voltage to the connector and check that the spot light comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 5 (B)
Battery negative (-) → 1 (E) |
Spot light switch LH on | Spot light LH comes on |
| Spot light switch RH on | Spot light RH comes on | |
| Battery positive (+) → 5 (B)
Battery negative (-) → 2 (CTY) |
Spot light switch LH off | Spot light LH comes on |
| Spot light switch RH off | Spot light RH comes on |
If the result is not as specified, replace the spot light assembly.
81360T
2.INSPECT SPOT LIGHT ASSEMBLY (with Rear Seat Armrest Illumination)
| *a | Component without harness connected
(Spot Light Assembly) |
Inspect the spot light LH and spot light RH.
Apply battery voltage to the connector and check that the spot light comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 5 (B)
Battery negative (-) → 1 (E) |
Spot light switch LH on | Spot light LH comes on |
| Spot light switch RH on | Spot light RH comes on | |
| Battery positive (+) → 5 (B)
Battery negative (-) → 2 (CTY) |
Spot light switch LH off | Spot light LH comes on |
| Spot light switch RH off | Spot light RH comes on |
If the result is not as specified, replace the spot light assembly.
Inspect the switch illumination and rear seat armrest illumination.
Apply battery voltage to the connector and check that the switch illumination and rear seat armrest illumination come on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 4 (ILL+)
Battery negative (-) → 3 (ILL-) |
Always | Switch illumination comes on |
| Rear seat armrest illumination switch on | Rear seat armrest illumination comes on |
If the result is not as specified, replace the spot light assembly.