Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM33A0E _58 Vehicle Interior _065380 LIGHTING (INT) _0326991 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 89782 1.INSPECT IGNITION KEY CYLINDER LIGHT (TRANSPONDER KEY COIL)

E287988C01
0.938,1.708 1.521,1.406 false 2.323,1.76 1.896,1.417 false 0.208,0.146 0.521,0.344 0.313,0.198 10 false *a 2.271,1.802 2.885,2 0.615,0.198 10 false ILL+ 0.76,1.76 1.375,1.958 0.615,0.198 10 false ILL-
*a Component without harness connected
(Ignition Key Cylinder Light (Transponder Key Coil))


a.

Apply battery voltage to the connector and check that the ignition key cylinder light comes on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (ILL+)
Battery negative (-) → 4 (ILL-)
Always Ignition key cylinder light comes on


If the result is not as specified, replace the ignition key cylinder light (transponder key coil).