Home › Vehicle Interior › LIGHTING (INT) › FOOTWELL LIGHT
RM33A0E _58 Vehicle Interior _065380 LIGHTING (INT) _0326994 FOOTWELL LIGHT G

LIGHTING (INT)  FOOTWELL LIGHT  INSPECTION  


PROCEDURE

Hide 81080J 1.INSPECT FOOTWELL LIGHT LH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY)

E262975C40
1.063,1.635 1.479,1.219 false 1.917,1.229 2.427,1.615 false 0.26,0.219 0.688,0.542 0.427,0.323 10 false *a 0.875,1.635 1.198,1.969 0.323,0.333 10 false B 2.5,1.635 2.823,1.969 0.323,0.333 10 false E
*a Component without harness connected
(Footwell Light LH (No. 1 Interior Illumination Light Assembly))


a.

Apply battery voltage to the connector and check that the footwell light LH comes on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (B)
Battery negative (-) → 1 (E)
Always Footwell light LH comes on


If the result is not as specified, replace the footwell light LH (No. 1 interior illumination light assembly).


Hide 81080J 2.INSPECT FOOTWELL LIGHT RH (NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY)

E262975C41
1.063,1.635 1.479,1.219 false 1.917,1.229 2.427,1.615 false 0.26,0.219 0.688,0.542 0.427,0.323 10 false *a 0.875,1.635 1.198,1.969 0.323,0.333 10 false B 2.5,1.635 2.823,1.969 0.323,0.333 10 false E
*a Component without harness connected
(Footwell Light RH (No. 1 Interior Illumination Light Assembly))


a.

Apply battery voltage to the connector and check that the footwell light RH comes on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (B)
Battery negative (-) → 1 (E)
Always Footwell light RH comes on


If the result is not as specified, replace the footwell light RH (No. 1 interior illumination light assembly).