Home › Vehicle Interior › LIGHTING (INT) › AMBIENT LIGHT
RM33A0E _58 Vehicle Interior _065380 LIGHTING (INT) _0326996 AMBIENT LIGHT G

LIGHTING (INT)  AMBIENT LIGHT  INSPECTION  


PROCEDURE

Hide 813A0 1.INSPECT INSTRUMENT PANEL AMBIENT ILLUMINATION LIGHT (INSTRUMENT PANEL LIGHT ASSEMBLY)

E262975C43
1.063,1.635 1.479,1.219 false 1.917,1.229 2.427,1.615 false 0.26,0.219 0.688,0.542 0.427,0.323 10 false *a 0.875,1.635 1.198,1.969 0.323,0.333 10 false B 2.5,1.635 2.823,1.969 0.323,0.333 10 false E
*a Component without harness connected
(Instrument Panel Ambient Illumination Light (Instrument Panel Light Assembly))


a.

Apply battery voltage to the connector and check that the instrument panel ambient illumination light comes on.

OK:
Measurement Condition Condition Specified Condition
Battery positive (+) → 2 (B)
Battery negative (-) → 1 (E)
Always Instrument panel ambient illumination light comes on


If the result is not as specified, replace the instrument panel ambient illumination light (instrument panel light assembly).