Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY
RM33A0E _59 Vehicle Exterior _065395 LIGHTING (EXT) _0327003 SIDE TURN SIGNAL LIGHT ASSEMBLY G

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81740 1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

E221729C55
1.302,1.74 1.583,1.229 false 2.073,1.729 1.844,1.229 false 0.177,0.083 0.385,0.271 0.208,0.188 10 false *a 1.219,1.75 1.375,1.948 0.156,0.198 10 false B 2.063,1.75 2.219,1.948 0.156,0.198 10 false E
*a Component without harness connected
(Side Turn Signal Light Assembly LH)


a.

Apply battery voltage to the side turn signal light assembly LH and check that the light illuminates.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Side turn signal light illuminates


If the result is not as specified, replace the side turn signal light assembly LH.


Hide 81730 2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

E221729C55
1.302,1.74 1.583,1.229 false 2.073,1.729 1.844,1.229 false 0.177,0.083 0.385,0.271 0.208,0.188 10 false *a 1.219,1.75 1.375,1.948 0.156,0.198 10 false B 2.063,1.75 2.219,1.948 0.156,0.198 10 false E
*a Component without harness connected
(Side Turn Signal Light Assembly RH)


a.

Apply battery voltage to the side turn signal light assembly RH and check that the light illuminates.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Side turn signal light illuminates


If the result is not as specified, replace the side turn signal light assembly RH.