Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2017.09–2017.12
RM33A0E _59 Vehicle Exterior _065395 LIGHTING (EXT) _0327004 REAR COMBINATION LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81560 1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for Bulb Type Back-up Light)

E371639C07
0.979,1.719 1.479,1.948 true 1.99,1.969 2.479,1.76 true 1.979,2.417 2.479,2.646 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.76,1.635 1.073,1.833 0.313,0.198 10 false TL 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 2.531,1.667 2.844,1.865 0.313,0.198 10 false STP
*a Component without harness connected
(Rear Combination Light Assembly LH)


a.

Apply battery voltage to the rear combination light assembly LH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (TL)
Battery negative (-) → Terminal 4 (E)
Taillight and side marker light illuminate
Battery positive (+) → Terminal 2 (STP)
Battery negative (-) → Terminal 4 (E)
Stop light illuminates


If the result is not as specified, replace the rear combination light assembly LH.


Hide 81560 2.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (for LED Type Back-up Light)

E371639C08
0.979,1.719 1.479,1.948 true 1.99,1.969 2.479,1.76 true 1.979,2.417 2.479,2.646 true 0.958,2.656 1.49,2.438 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.76,1.635 1.073,1.833 0.313,0.198 10 false TL 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 2.531,1.667 2.844,1.865 0.313,0.198 10 false STP 0.833,2.635 1.146,2.833 0.313,0.198 10 false B
*a Component without harness connected
(Rear Combination Light Assembly LH)


a.

Apply battery voltage to the rear combination light assembly LH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (TL)
Battery negative (-) → Terminal 4 (E)
Taillight and side marker light illuminate
Battery positive (+) → Terminal 2 (STP)
Battery negative (-) → Terminal 4 (E)
Stop light illuminates
Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 4 (E)
Turn signal light illuminates


If the result is not as specified, replace the rear combination light assembly LH.


Hide 81550 3.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for Bulb Type Back-up Light)

E371639C07
0.979,1.719 1.479,1.948 true 1.99,1.969 2.479,1.76 true 1.979,2.417 2.479,2.646 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.76,1.635 1.073,1.833 0.313,0.198 10 false TL 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 2.531,1.667 2.844,1.865 0.313,0.198 10 false STP
*a Component without harness connected
(Rear Combination Light Assembly RH)


a.

Apply battery voltage to the rear combination light assembly RH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (TL)
Battery negative (-) → Terminal 4 (E)
Taillight and side marker light illuminate
Battery positive (+) → Terminal 2 (STP)
Battery negative (-) → Terminal 4 (E)
Stop light illuminates


If the result is not as specified, replace the rear combination light assembly RH.


Hide 81550 4.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (for LED Type Back-up Light)

E371639C08
0.979,1.719 1.479,1.948 true 1.99,1.969 2.479,1.76 true 1.979,2.417 2.479,2.646 true 0.958,2.656 1.49,2.438 true 0.448,0.5 0.76,0.698 0.313,0.198 10 false *a 0.76,1.635 1.073,1.833 0.313,0.198 10 false TL 2.531,2.646 2.844,2.844 0.313,0.198 10 false E 2.531,1.667 2.844,1.865 0.313,0.198 10 false STP 0.833,2.635 1.146,2.833 0.313,0.198 10 false B
*a Component without harness connected
(Rear Combination Light Assembly RH)


a.

Apply battery voltage to the rear combination light assembly RH and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 1 (TL)
Battery negative (-) → Terminal 4 (E)
Taillight and side marker light illuminate
Battery positive (+) → Terminal 2 (STP)
Battery negative (-) → Terminal 4 (E)
Stop light illuminates
Battery positive (+) → Terminal 3 (B)
Battery negative (-) → Terminal 4 (E)
Turn signal light illuminates


If the result is not as specified, replace the rear combination light assembly RH.


Hide 81536A 5.INSPECT REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)

E365727C04
0.74,2.729 1.51,1.458 false 2.625,2.781 1.719,1.479 false 0.281,0.25 0.594,0.448 0.313,0.198 10 false *a 2.646,2.802 2.958,3 0.313,0.198 10 false E 0.552,2.771 0.917,3 0.365,0.229 10 false STP
*a Component without harness connected
(Rear Combination Light LED)


a.

Apply battery voltage to the rear combination light LED and check that the lights illuminate.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 3 (STP)
Battery negative (-) → Terminal 2 (E)
Stop light illuminates


If the result is not as specified, replace the rear combination light LED.