Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2017.09–2017.12
RM33A0E _59 Vehicle Exterior _065395 LIGHTING (EXT) _0327004 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 81561D 1.INSTALL REAR COMBINATION LIGHT LENS AND BODY (for Bulb Type Back-up Light)

Hide 81565E 2.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE (for Bulb Type Back-up Light)

a.
E386214

Connect the connector.


b.

Engage the 2 clamps to install the rear combination light socket and wire.


Hide 81565D 3.INSTALL REAR COMBINATION LIGHT CORD (for LED Type Back-up Light)

a.
E371342

Connect the connector.


b.

Engage the 2 clamps to install the rear combination light cord.


Hide 81550L 4.INSTALL REAR TURN SIGNAL LIGHT BULB (for Bulb Type Back-up Light)

a.

Install the rear turn signal light bulb to the rear combination light socket and wire.


b.
E371305C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light socket and wire with the rear turn signal light bulb as shown in the illustration to install them as a unit.


Hide 81552C 5.INSTALL REAR COMBINATION LIGHT GASKET (for Bulb Type Back-up Light)

a.
E365013

Install a new rear combination light gasket.


Hide 81536A 6.INSTALL REAR COMBINATION LIGHT LED (for Bulb Type Back-up Light)

a.
E371303C01
0,0 0,0 false
V113147

Install in this Direction


Turn the rear combination light LED as shown in the illustration to temporarily install it.


b.
E371301

Install the rear combination light LED with the screw.


c.

Connect the connector.