Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY
RM33A0E _59 Vehicle Exterior _065395 LIGHTING (EXT) _0327018 FOG LIGHT ASSEMBLY G

LIGHTING (EXT)  FOG LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81220 1.INSPECT FOG LIGHT ASSEMBLY LH

E371638C02
1.208,2.708 1.573,2.156 true 2.24,2.729 1.875,2.156 true 0.802,0.917 1.115,1.115 0.313,0.198 10 false *a 1.115,2.771 1.271,2.969 0.156,0.198 10 false B 2.25,2.781 2.406,2.979 0.156,0.198 10 false E
*a Component without harness connected
(Fog Light Assembly LH)


a.

Apply battery voltage to the fog light assembly LH and check that the light illuminates.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Fog light illuminates


If the result is not as specified, replace the fog light assembly LH.


Hide 81210A 2.INSPECT FOG LIGHT ASSEMBLY RH

E371638C02
1.208,2.708 1.573,2.156 true 2.24,2.729 1.875,2.156 true 0.802,0.917 1.115,1.115 0.313,0.198 10 false *a 1.115,2.771 1.271,2.969 0.156,0.198 10 false B 2.25,2.781 2.406,2.979 0.156,0.198 10 false E
*a Component without harness connected
(Fog Light Assembly RH)


a.

Apply battery voltage to the fog light assembly RH and check that the light illuminates.

OK:
Condition Specified Condition
Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 1 (E)
Fog light illuminates


If the result is not as specified, replace the fog light assembly RH.