81080U
1.INSPECT REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT LH (NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH)
| *a | Component without harness connected
(Rear Door Inside Handle Illumination Light LH (No. 2 Interior Illumination Light Assembly LH)) |
Apply battery voltage to the connector and check that the rear door inside handle illumination light LH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 2 (+)
Battery negative (-) → 1 (-) |
Always | Rear door inside handle illumination light LH comes on |
If the result is not as specified, replace the rear door inside handle illumination light LH (No. 2 interior illumination light assembly LH).
81080T
2.INSPECT REAR DOOR INSIDE HANDLE ILLUMINATION LIGHT RH (NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH)
| *a | Component without harness connected
(Rear Door Inside Handle Illumination Light RH (No. 2 Interior Illumination Light Assembly RH)) |
Apply battery voltage to the connector and check that the rear door inside handle illumination light RH comes on.
| Measurement Condition | Condition | Specified Condition |
|---|---|---|
| Battery positive (+) → 2 (+)
Battery negative (-) → 1 (-) |
Always | Rear door inside handle illumination light RH comes on |
If the result is not as specified, replace the rear door inside handle illumination light RH (No. 2 interior illumination light assembly RH).