Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The following procedure is for LHD vehicles.
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
71587
1.INSTALL FRONT SEATBACK EDGE PROTECTOR
72760D
2.INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY
|
Install in this Direction |
Install the lumbar support adjuster assembly to the front seatback frame sub-assembly as shown in the illustration.
Engage the 2 claws to install the 2 front seatback edge protectors to the front seatback frame sub-assembly.
| *a | Clamp (A) |
| *b | Clamp (B) |
Engage the clamp (B).
Connect the lumbar support adjuster assembly connector.
w/ Climate Control Seat System:
Engage the clamp (A).
85867
3.INSTALL SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)
4.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
71931
5.INSTALL FRONT SEAT HEADREST SUPPORT
6.INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY
71862
7.INSTALL FRONT SEAT INNER CUSHION SHIELD
71812D
8.INSTALL FRONT SEAT CUSHION SHIELD
71868N
9.INSTALL FRONT SEAT FRONT CUSHION SHIELD
71074S
10.CONNECT SEPARATE TYPE FRONT SEATBACK COVER
11.INSTALL FRONT SEAT ASSEMBLY