Home › Vehicle Exterior › WINDOW / GLASS › REAR POWER WINDOW SWITCH › 2017.09–2021.02
RM33A0E _59 Vehicle Exterior _065390 WINDOW / GLASS _0327252 REAR POWER WINDOW SWITCH G

WINDOW / GLASS  REAR POWER WINDOW SWITCH  INSPECTION  


PROCEDURE

Hide 84810D 1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH/RH DOOR)

a.
B351354C01
1.292,1.979 1.604,2.177 0.313,0.198 10 false *a
*a Component without harness connected
(Rear Power Window Regulator Switch Assembly (for LH/RH Door))


Check the switch function.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 - 7 Auto up or up position Below 100 Ω
4 - 7 Auto down or down position Below 100 Ω
8 - 7 Auto up or auto down position Below 100 Ω
5 - 7 Off 10 kΩ or higher
4 - 7 Off 10 kΩ or higher
8 - 7 Off 10 kΩ or higher


If the result is not as specified, replace the rear power window regulator switch assembly (for LH/RH door).



b.

Check that the LED illuminates.

i.

Apply battery voltage to the power window regulator switch assembly and check that the LED illuminates.

OK:
Battery Connection Specified Condition
Battery positive (+) → 3
Battery negative (-) → 1
LED illuminates


If the result is not as specified, replace the rear power window regulator switch assembly (for LH/RH door).