Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM
RM33A0E _58 Vehicle Interior _065383 SUPPLEMENTAL RESTRAINT SYSTEMS _0327338 AIRBAG SYSTEM C

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  B1650  Occupant Classification System Malfunction  B165A  Occupant Detection Sensor Zero Point Calibration Incomplete  


DESCRIPTION

The airbag sensor assembly and occupant detection ECU communicate via CAN communication.

When the occupant detection ECU stores DTC B1771, B1780, B1782, B1795, B1798, B1799, U0125 or U0129, the airbag sensor assembly receives this information and stores DTC B1650.

When the occupant detection ECU stores DTC B1785 or B1787, the airbag sensor assembly receives this information and stores DTC B165A.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Test Mode / Check Mode
B1650 Occupant Classification System Malfunction The occupant detection ECU has stored DTC B1771, B1780, B1782, B1795, B1798, B1799, U0125 or U0129. Occupant classification system Comes on Does not apply to test/check mode
B165A Occupant Detection Sensor Zero Point Calibration Incomplete The occupant detection ECU has stored DTC B1785 or B1787. Occupant classification system Comes on Does not apply to test/check mode

PROCEDURE

1.CHECK DTC (OCCUPANT CLASSIFICATION SYSTEM)
a.

Check for occupant classification system DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>OCCUPANT CLASSIFICATION SYSTEM>DTC CHECK / CLEAR

OK:

DTCs are not output.



Result:
Proceed to
OK
NG



OK

2.CLEAR DTC (AIRBAG SYSTEM)

NG

2.CLEAR DTC (AIRBAG SYSTEM)
a.

Turn the ignition switch to ON, and wait for at least 60 seconds.


b.

Clear the DTCs stored in memory.

Body Electrical > SRS Airbag > Clear DTCs
50002 188

Result:
Proceed to
NEXT



NEXT

END