Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › FRONT PASSENGER AIRBAG ASSEMBLY
RM33A0E _58 Vehicle Interior _065383 SUPPLEMENTAL RESTRAINT SYSTEMS _0327344 FRONT PASSENGER AIRBAG ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  FRONT PASSENGER AIRBAG ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 82149A 1.INSTALL NO. 5 INSTRUMENT PANEL WIRE (w/o Occupant Classification System)

a.
B468709C01
1.521,0.854 0.51,0.854 true 2.615,2.594 2.458,2.865 2.458,2.865 2.177,2.865 true 0.333,0.771 0.531,0.969 0.198,0.198 10 false *a 2,2.792 2.208,2.979 0.208,0.188 10 false *b
*a Airbag Connector
*b Airbag Connector Locking Button
V113147

Push in this Direction


Connect the airbag connector of the No. 5 instrument panel wire to the instrument panel passenger airbag assembly.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



b.

Push in the airbag connector locking button as shown in the illustration to install the airbag connector to the instrument panel passenger airbag assembly.


Hide 82149A 2.INSTALL NO. 5 INSTRUMENT PANEL WIRE (w/ Occupant Classification System)

a.
B468725C01
2.021,2.979 2.302,2.979 2.302,2.979 2.479,2.615 true 1.365,0.781 0.625,0.781 true 2.542,0.854 1.802,0.854 true 0.448,0.688 0.656,0.906 0.208,0.219 10 false *a 1.865,2.896 2.177,3.052 0.313,0.156 10 false *b 2.563,0.76 2.771,0.979 0.208,0.219 10 false *a
*a Airbag Connector
*b Airbag Connector Locking Button
V113147

Push in this Direction


Connect the 2 airbag connectors of the No. 5 instrument panel wire to the instrument panel passenger airbag assembly.

NOTICE:
·

When connecting any airbag connector, take care not to damage the airbag wire harness.

·

Be sure to only connect the connectors to each corresponding color.




b.

Push in the 2 airbag connector locking buttons as shown in the illustration to install the 2 airbag connectors to the instrument panel passenger airbag assembly.


Hide 73960A 3.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (w/o Occupant Classification System)

a.
B468699

Engage the 3 hooks.


b.
B468707

Push in the instrument panel passenger airbag assembly to engage the 3 hooks.


c.
B468697

Install the instrument panel passenger airbag assembly with the 2 screws.


d.

Engage the clamp.


Hide 73960A 4.INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (w/ Occupant Classification System)

a.
B468723

Engage the 3 hooks.


b.
B468722

Push in the instrument panel passenger airbag assembly to engage the 3 hooks.


c.
B490008

Install the instrument panel passenger airbag assembly with the 2 screws.


d.

Engage the clamp.


Hide 5.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide 82149A 6.CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/o Occupant Classification System)

a.

Check that the ignition switch is off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:
B422343

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.
B468704

Connect the connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



Hide 82149A 7.CONNECT NO. 5 INSTRUMENT PANEL WIRE (w/ Occupant Classification System)

a.

Check that the ignition switch is off.


b.

Check that the cable is disconnected from the negative (-) battery terminal.

CAUTION:
B422343

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



c.
B468719

Connect the connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.



Hide 55650 8.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY