Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CENTER AIRBAG SENSOR ASSEMBLY
RM33A0E _58 Vehicle Interior _065383 SUPPLEMENTAL RESTRAINT SYSTEMS _0327348 CENTER AIRBAG SENSOR ASSEMBLY G

SUPPLEMENTAL RESTRAINT SYSTEMS  CENTER AIRBAG SENSOR ASSEMBLY  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:
B414102

Be sure to correctly follow the removal and installation procedures for the airbag sensor assembly.


PROCEDURE

Hide 89170 1.INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)

Hide 89170 2.INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


b.

Visually check for defects with the airbag sensor assembly installed to the vehicle.

HINT:

The defects are as follows:

·

Cracks in the sensor housing

·

Dents in the sensor housing

·

Chips in the sensor housing

·

Cracks or other damage to the connectors

·

Peeling of the label



OK:

No defects are found.


If any defects are found, replace the airbag sensor assembly with a new one.


Hide 89170 3.INSPECT AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)

a.

Replace the airbag sensor assembly.

HINT:

The airbag sensor assembly should be replaced after any of the SRS parts has deployed, as it has been subjected to an impact.