83950M
1.INSPECT TELLTALE LIGHT ASSEMBLY (w/ Rear Seat Belt Warning)
| *1 | Rear seat belt warning light (Telltale Light Assembly) |
| *a | LH |
| *b | Center |
| *c | RH |
| *d | Component without harness connected
(Telltale Light Assembly) |
Apply battery voltage to the connector according to the table below.
| Battery Connection | Result |
|---|---|
| Battery positive (+) - Terminal 10
Battery negative (-) - Terminal 3 |
Rear seat belt warning light (RH) comes on |
| Battery positive (+) - Terminal 10
Battery negative (-) - Terminal 2 |
Rear seat belt warning light (center) comes on |
| Battery positive (+) - Terminal 10
Battery negative (-) - Terminal 1 |
Rear seat belt warning light (LH) comes on |
If the result is not as specified, replace the telltale light assembly.