Home › General › MAINTENANCE › 2GR-FKS DRIVE BELT
RM33A0E _V1 General _065356 MAINTENANCE _0327397 2GR-FKS DRIVE BELT A

MAINTENANCE  2GR-FKS DRIVE BELT  REMOVAL  


PROCEDURE

Hide 1.REMOVE FRONT WHEEL RH

Hide 53736 2.REMOVE FRONT FENDER APRON SEAL RH

Hide 16361A 3.REMOVE V-RIBBED BELT

a.
A399857

Release the V-ribbed belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.


b.

Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.


c.

Remove the V-ribbed belt from the V-ribbed belt tensioner assembly.