Home › General › MAINTENANCE › BRAKE VACUUM HOSE (for LHD) › 2017.09–2018.04
RM33A0E _V1 General _065356 MAINTENANCE _0327421 BRAKE VACUUM HOSE(for LHD) A

MAINTENANCE  BRAKE VACUUM HOSE(for LHD)  REMOVAL  


PROCEDURE

Hide 55708 1.REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for 2AR-FE, 2GR-FKS)

Hide 53607A 2.REMOVE FRONT CENTER UPPER SUSPENSION BRACE SUB-ASSEMBLY (for 2AR-FE, 2GR-FKS)

Hide 44772 3.REMOVE CHECK VALVE TO CONNECTOR TUBE HOSE (for 2AR-FE)

a.
C375958

Slide the clip and disconnect the check valve to connector tube hose from the brake booster assembly.


b.

Slide the clip and disconnect the check valve to connector tube hose from the No. 1 hose to hose tube.


c.

Remove the 2 clips from the check valve to connector tube hose.


Hide 44774 4.REMOVE UNION TO CONNECTOR TUBE HOSE (for 2AR-FE)

a.
C375959

Slide the clip and disconnect the union to connector tube hose from the No. 1 hose to hose tube.


b.
C375963

Separate the union to connector tube hose from the vacuum hose clamp.


c.

Slide the clip and disconnect the union to connector tube hose from the intake manifold.


d.

Remove the 2 clips from the union to connector tube hose.


Hide 44763A 5.REMOVE NO. 1 HOSE TO HOSE TUBE (for 2AR-FE)

a.
C375960

Remove the 2 nuts and No. 1 hose to hose tube.


Hide 44773F 6.REMOVE UNION TO CHECK VALVE HOSE (for A25A-FKS)

a.
C373425

Slide the clip and disconnect the union to check valve hose from the brake booster assembly.


b.
C373424

Slide the clip and disconnect the union to check valve hose from the No. 1 vacuum hose connector.


c.

Remove the 2 clips from the union to check valve hose.


Hide 44777 7.REMOVE NO. 1 VACUUM HOSE CONNECTOR (for A25A-FKS)

a.
C373404

Disconnect the vacuum hose from the No. 1 vacuum hose connector.


b.
C373406C01
2.531,3.708 2.24,3.948 2.24,3.948 2.51,3.458 true 2.115,3.927 2.427,4.083 0.313,0.156 10 false *a
*a Retainer
V100135

Pinch
V113148

Pull off


Pinch the retainer of the No. 1 vacuum hose connector, and then pull the No. 1 vacuum hose connector off of the vacuum pump assembly.

NOTICE:

Be sure to remove the No. 1 vacuum hose connector by hand.



Hide 44773F 8.REMOVE UNION TO CHECK VALVE HOSE (for 2GR-FKS)

a.
C375943

Disengage the clamp to separate the union to check valve hose from the air tube.


b.
C375944

Slide the clip and disconnect the union to check valve hose from the brake booster assembly.


c.
C375945

Slide the clip and disconnect the union to check valve hose from the air delivery way.


d.

Remove the 2 clips from the union to check valve hose.


Hide 17361M 9.REMOVE AIR TUBE (for 2GR-FKS)

a.
C375948

Disconnect the 2 vacuum transmitting hose assemblies from the air delivery way.


b.
C375946

Slide the clip and disconnect the air tube from the vacuum pump assembly.


c.
C375949

Slide the clip and disconnect the air tube from the air delivery way.


d.

Remove the 2 clips from the air tube.


e.
C375951

Disengage the clamp to remove the air delivery way from the intake air surge tank assembly.