Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2017.09–2021.02
RM33A0E _59 Vehicle Exterior _065397 EXTERIOR PANELS / TRIM _0319663 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.

w/ TOYOTA Parking Assist-sensor System:

i.

Connect the connector.



b.
B470436C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 guides and 4 claws as shown in the illustration.


c.
B488726C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 6 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



d.

Install the 2 screws.


e.

for Single Type:

i.

Install the rear bumper assembly with the 11 clips.



f.

for Dual Type:

i.

Install the rear bumper assembly with the 10 clips.



Hide 81498 2.INSTALL REAR COMBINATION LIGHT COVER LH

Hide 81497 3.INSTALL REAR COMBINATION LIGHT COVER RH

HINT:

Use the same procedure as for the LH side.