Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH
RM33A0E _58 Vehicle Interior _065378 DOOR LOCK _0327771 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84930 1.INSPECT DOOR CONTROL SWITCH ASSEMBLY

a.
B364354C03
0.188,0.135 0.573,0.448 0.385,0.313 10 false *a
*a Component without harness connected
(Door Control Switch Assembly)


Check the switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 - 5 Lock switch pushed Below 200 Ω
4 - 5 Lock switch not pushed 1 MΩ or higher
2 - 5 Unlock switch not pushed 1 MΩ or higher
2 - 5 Unlock switch pushed Below 200 Ω


If the result is not as specified, replace the fuel lid opener switch.



b.

Check the switch illumination.

i.

Apply battery voltage to the switch connector and check that the door control switch assembly illuminates.

OK:
Battery Condition Specified Condition
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 1
Illumination illuminates


If the result is not as specified, replace the fuel lid opener switch.