73350C
1.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Fold Down Seat Type)
2.REMOVE REAR SEAT CUSHION ASSEMBLY (for Fold Down Seat Type)
72693
3.REMOVE REAR SEAT CUSHION LOCK HOOK (for Fold Down Seat Type)
62331A
4.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH (for Fold Down Seat Type)
Use the same procedure as for the LH side.
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Fold Down Seat Type)>REMOVAL
5.REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for Fold Down Seat Type)
Use the same procedure as for the LH side.
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Fold Down Seat Type)>REMOVAL
71940A
6.REMOVE REAR SEAT HEADREST ASSEMBLY (for Reclining Seat Type)
73350C
7.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Reclining Seat Type)
8.REMOVE REAR SEAT CUSHION ASSEMBLY (for Reclining Seat Type)
72693
9.REMOVE REAR SEAT CUSHION LOCK HOOK (for Reclining Seat Type)
72996A
10.REMOVE REAR SEATBACK COVER (for Reclining Seat Type)
11.REMOVE REAR SEATBACK ASSEMBLY RH (for Reclining Seat Type)
62331A
12.DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH (for Reclining Seat Type)
Use the same procedure as for the LH side.
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Reclining Seat Type)>REMOVAL
13.REMOVE REAR SIDE SEATBACK ASSEMBLY RH (for Reclining Seat Type)
Use the same procedure as for the LH side.
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for Reclining Seat Type)>REMOVAL
62471A
14.REMOVE INNER ROOF SIDE GARNISH RH
Use the same procedure as for the LH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>REMOVAL
89741
15.REMOVE DOOR CONTROL RECEIVER (w/o Smart Entry and Start System)
Do not drop, strike or otherwise subject the door control receiver to impact.
If the door control receiver is subjected to an impact, replace it with a new one.
Remove the bolt.
Disengage the 2 guides.
Disconnect the connector to remove the door control receiver.
89740A
16.REMOVE SMART DOOR CONTROL RECEIVER ASSEMBLY (w/ Smart Entry and Start System)
Do not drop, strike or otherwise subject the smart door control receiver assembly to impact.
If the smart door control receiver assembly is subjected to an impact, replace it with a new one.
Remove the bolt.
Disengage the 2 guides.
Disconnect the connector to remove the smart door control receiver assembly.