Wear protective gloves. Sharp areas on the parts may injure your hands.
1.REMOVE REAR SIDE SEATBACK COVER WITH PAD (for LH Side)
Disengage the 11 hooks.
|
Remove in this Direction |
Remove the rear side seatback cover with pad from the rear side seatback frame sub-assembly LH as shown in the illustration.
71089A
2.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)
Remove the rear side seatback cover sub-assembly LH from the rear side seatback pad LH.
3.REMOVE REAR SIDE SEATBACK COVER WITH PAD (for RH Side)
Use the same procedure as for the LH side.
71088A
4.REMOVE REAR SIDE SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)
Use the same procedure as for the LH side.
73344
5.REMOVE REAR SEAT SHOULDER BELT GUIDE LH (for LH Side)
Remove the 2 screws.
Disengage the guide to remove the rear seat shoulder belt guide LH.
71931A
6.REMOVE REAR SEAT HEADREST SUPPORT (for LH Side)
|
Remove in this Direction |
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
7.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)
Disengage the 13 hooks.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly.
71078S
8.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for LH Side)
Using a screwdriver, disengage the 8 claws and remove the separate type rear seatback cover from the separate type rear seatback pad as shown in the illustration.
| *a | Screwdriver | - | - |
73345
9.REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE (for RH Side)
Remove the 2 screws.
Disengage the guide to remove the rear seat center shoulder belt guide.
73343
10.REMOVE REAR SEAT SHOULDER BELT GUIDE RH (for RH Side)
Use the same procedure as for the LH side.
71931A
11.REMOVE REAR SEAT HEADREST SUPPORT (for RH Side)
Use the same procedure as for the LH side.
12.REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)
Use the same procedure as for the LH side.
71078S
13.REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side)
Use the same procedure as for the LH side.
14.REMOVE REAR CENTER SEATBACK FRAME WITH COVER AND PAD (for Center Seat)
Remove the 2 nuts.
Disengage the 2 claws to remove the rear center seatback frame with cover and pad.
72883A
15.REMOVE NO. 1 REAR SEAT CENTER ARMREST BRACKET (for Center Seat)
Disengage the clamp.
Remove the 2 bolts, 2 bushes and No. 1 rear seat center armrest bracket.
72830
16.REMOVE REAR SEAT CENTER ARMREST ASSEMBLY (for Center Seat)
Disengage the clamp.
Disengage the 2 clips to remove the rear seat center armrest assembly from the rear seat center armrest box assembly.
88660C
17.REMOVE COOLER CONTROL SWITCH ASSEMBLY (for Center Seat)
Disengage the 4 claws.
Disconnect the 2 connectors to remove the cooler control switch assembly.
72806D
18.REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY (for Center Seat)
Remove the 2 screws and rear seat center armrest cover with pad.
Disengage the 16 claws to remove the 2 rear seat center armrest plates.
|
Remove in this Direction |
Remove the 2 screws and rear seat center armrest cup holder sub-assembly as shown in the illustration.
82176
19.REMOVE REAR CONSOLE BOX WIRE (for Center Seat)
Remove the rear seat center armrest pad from the rear seat center armrest box.
Disengage the 3 clamps and remove the rear console box wire.
71931A
20.REMOVE REAR SEAT HEADREST SUPPORT (for Center Seat)
|
Remove in this Direction |
Disengage the 4 claws and remove the 2 rear seat headrest supports as shown in the illustration.
71095S
21.REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY
Disengage the 7 hooks and remove the center seatback cover with pad from the center seatback frame sub-assembly.
Remove the center seatback cover sub-assembly from the center seatback pad sub-assembly.
72740A
22.REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY LH
Disconnect the connector.
Remove the 2 bolts and 2 nuts, and rear seat reclining adjuster assembly LH.
72730A
23.REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY RH
Use the same procedure as for the LH side.
73731
24.REMOVE CHILD RESTRAINT SEAT COVER
|
Remove in this Direction |
Disengage the 2 claws and 2 guides to remove the child restraint seat cover as shown in the illustration.
Use the same procedure for all of the child restraint seat covers.
73733
25.REMOVE CHILD RESTRAINT SEAT BASE COVER
|
Remove in this Direction |
Remove the screw.
Disengage the claw and guide to remove the child restraint seat base cover as shown in the illustration.
Use the same procedure for all of the child restraint seat base covers.
71075B
26.REMOVE BENCH TYPE REAR SEAT CUSHION COVER
Disengage the 4 fasteners.
|
Fastener | - | - |
Disengage the 6 hooks.
Remove the 6 hog rings.
Remove the 2 hog rings.
Disengage the 20 hooks.
Using a screwdriver, disengage the 24 claws and remove the bench type rear seat cushion cover from the rear seat cushion pad sub-assembly as shown in the illustration.
| *a | Screwdriver | - | - |