Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SECURITY INDICATOR LIGHT ASSEMBLY › 2017.09–2021.02
RM33A0E _58 Vehicle Interior _065379 THEFT DETERRENT / KEYLESS ENTRY _0328247 SECURITY INDICATOR LIGHT ASSEMBLY G

THEFT DETERRENT / KEYLESS ENTRY  SECURITY INDICATOR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83950M 1.INSPECT SECURITY INDICATOR LIGHT (TELLTALE LIGHT ASSEMBLY) (w/ Telltale Light Assembly)

a.
C148527C12
0.25,0.135 0.552,0.333 0.302,0.198 10 false *a
*a Component without harness connected
(Security Indicator Light (Telltale Light Assembly))


Apply battery voltage to the connector according to the table below.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 9
Battery negative (-) → Terminal 6
Security indicator light comes on


If the result is not as specified, replace the security indicator light (telltale light assembly).


Hide 83910G 2.INSPECT SECURITY INDICATOR LIGHT (CLOCK ASSEMBLY) (w/ Clock Assembly)

a.
C148527C12
0.25,0.135 0.552,0.333 0.302,0.198 10 false *a
*a Component without harness connected
(Security Indicator Light (Clock Assembly))


Apply battery voltage to the connector according to the table below.

OK:
Battery Connection Specified Condition
Battery positive (+) → Terminal 5
Battery negative (-) → Terminal 7
Security indicator light comes on


If the result is not as specified, replace the security indicator light (clock assembly).