Home › Engine / Hybrid System › 2AR-FE (FUEL) › FUEL PUMP › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065325 2AR-FE FUEL _0328385 FUEL PUMP A

2AR-FE FUEL  FUEL PUMP  REASSEMBLY  


PROCEDURE

Hide 23221 1.INSTALL FUEL PUMP

HINT:

Perform "Inspection After Repair" after replacing the fuel pump.

Click hereEngine / Hybrid System>2AR-FE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.
A405921C01
2.406,0.969 2.521,0.76 2.521,0.76 2.615,0.76 false 2.406,1.125 2.667,1.125 false 2.667,0.677 2.979,0.833 0.313,0.156 10 false *1 2.729,1.042 3.042,1.198 0.313,0.156 10 false *2
*1 O-ring
*2 Fuel Pump Spacer


Apply gasoline to a new O-ring. Then install the O-ring and fuel pump spacer to the fuel pump.


b.

Connect the fuel pump harness connector to install the fuel pump harness to the fuel pump.


c.

Engage the 5 claws to install the fuel pump to the fuel filter.

NOTICE:
·

Make sure that the O-ring is not cut or pinched during the installation.

·

Securely engage the claws.




d.

Engage the 2 claws to install the No. 1 fuel suction support to the fuel filter.


e.

Engage the 2 claws to install the fuel filter to the fuel sub-tank.

NOTICE:
·

Do not apply excessive force to the tube or No. 1 fuel suction support.

·

Securely engage the claws.




f.
A405922

Engage the clamp and claw, and connect the fuel pump filter hose while aligning it with the installation position of the fuel sub-tank.

NOTICE:

Securely engage the clamp and claw.



g.

Connect the fuel pump harness connector.


Hide 83320 2.INSTALL FUEL SENDER GAUGE ASSEMBLY