Home › General › SPECIFICATIONS › 2AR-FE FUEL › 2017.09–2021.02
RM33A0E _V1 General _065355 SPECIFICATIONS _0318913 2AR-FE FUEL F

SPECIFICATIONS  2AR-FE FUEL  SERVICE DATA  


Fuel pressure Standard fuel pressure 304 to 343 kPa (3.1 to 3.5 kgf/cm2, 44 to 50 psi)
Fuel pressure: for 5 minutes after engine has stopped Standard fuel pressure 147 kPa (1.5 kgf/cm2, 21 psi) or more
Fuel injector assembly Standard resistance 11.6 to 12.4 Ω at 20°C (68°F)
Standard injection volume 87 to 105 cc (5.3 to 6.4 cu. in.) per 15 seconds
Difference between each fuel injector assembly 18 cc (1.1 cu. in.) or less
Standard fuel drop 1 drop or less per 20 minutes
Fuel pump Standard resistance 0.2 to 3.0 Ω at 20°C (68°F)
Fuel sender gauge assembly Standard voltage 4.255 to 4.605 V (Float level F)
0.345 to 4.605 V (Float level F to E)
0.345 to 0.695 V (Float level E)