Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for 2AR-FE) › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065357 CRUISE CONTROL _0327280 CRUISE CONTROL SYSTEM(for 2AR-FE) U

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for 2AR-FE)  TERMINALS OF ECM  


CHECK ECM


A247842N92
2.458,0.354 2.854,0.594 0.396,0.24 5.906,0.354 6.302,0.594 0.396,0.24 2.542,0.396 2.948,0.625 0.406,0.229 10 false C58 5.979,0.396 6.385,0.656 0.406,0.26 10 false A22

HINT:

The standard voltage, resistance and waveform between each pair of the ECM terminals is shown in the table below. The appropriate conditions for checking each pair of the terminals is also indicated. The result of checks should be compared with the standard voltage, resistance and waveform for each pair of the terminals as displayed in the Specified Condition column. The illustration above can be used as a reference to identify the ECM terminal locations.


Terminal No. (Symbols) Wiring Color Terminal Description Condition Specified Condition
A22-1 (BATT) - C58-59 (E1) R - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
C58-66 (D) - C58-59 (E1) R - W-B D shift position signal Ignition switch ON, shift lever in D 11 to 14 V
Ignition switch ON, shift lever not in D Below 1 V
A22-59 (S) - C58-59 (E1) GR - W-B S shift position signal Ignition switch ON, shift lever in S 11 to 14 V
Ignition switch ON, shift lever not in S Below 1 V
A22-9 (STP) - C58-59 (E1) SB - W-B Stop light switch signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
A22-36 (CCS) - A22-35 (ECCS) R - BE Steering pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
+RES switch pushed 235 to 245 Ω
-SET switch pushed 617 to 643 Ω
CANCEL switch pushed 1509 to 1571 Ω
A22-10 (ST1-) - C58-59 (E1) LG - W-B Stop light switch signal Ignition switch ON, brake pedal depressed Below 1 V
Ignition switch ON, brake pedal released 11 to 14 V
A22-43 (SFTD) - C58-59 (E1) W - W-B Down-shift position switch signal Ignition switch ON, shift lever in S 11 to 14 V
Ignition switch ON, shift lever in "-" Below 1 V
A22-42 (SFTU) - C58-59 (E1) G - W-B Up-shift position switch signal Ignition switch ON, shift lever in S 11 to 14 V
Ignition switch ON, shift lever in "+" Below 1 V