Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
RM33A0E _55 Steering _065370 POWER ASSIST SYSTEMS _0327166 POWER STEERING SYSTEM U

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  TERMINALS OF ECU  


TERMINALS OF ECU


C375104C01
3.354,0.146 3.802,0.406 0.448,0.26 0.104,0.052 0.417,0.208 0.313,0.156 10 false *a 3.448,0.198 3.802,0.396 0.354,0.198 10 false C71
*a Component without harness connected
(Rack and Pinion Power Steering Gear Assembly)
- -


HINT:
·

The rack and pinion power steering gear assembly uses waterproof connectors. Therefore, voltage or waveforms cannot be checked with the connectors connected to the vehicle.

·

Use the Data List and Active Test on the GTS to check the operation of the rack and pinion power steering gear assembly and check that communication is established.

Click hereSteering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DATA LIST / ACTIVE TEST



Terminal No. (Symbol) Terminal Description
C71-4 (IG) IG power source
C71-7 (PGND) power ground
C71-8 (PIG) power source
C71-10 (CANH) CAN communication line
C71-11 (CANL) CAN communication line


CHECK WIRE HARNESS SIDE CONNECTOR


C374510C04
1.917,0.771 2.333,1 0.417,0.229 2,0.802 2.458,1 0.458,0.198 10 false C71 0.094,0.052 0.406,0.25 0.313,0.198 10 false *a
*a Front view of wire harness connector
(to Rack and Pinion Power Steering Gear Assembly)
- -


a.

Disconnect the C71 rack and pinion power steering gear assembly.


b.

Measure the voltage and resistance according to the value(s) in the table below.



Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
C71-4 (IG) - Body ground W - Body ground IG power source Ignition switch ON 8 to 16 V
C71-7 (PGND) - Body ground B - Body ground power ground Always Below 1 Ω
C71-8 (PIG) - Body ground W - Body ground power source Always 9 to 16 V