CHECK DTC AND FREEZE FRAME DATA (USING GTS)
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / ABS/VSC/TRC/EPB Trouble Codes.
Check for DTCs.
Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE SYSTEM>DIAGNOSTIC TROUBLE CODE CHART
The electric parking brake system outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the electric parking brake system are output, refer to Diagnostic Trouble Code Chart for the relevant system.
| System | Proceed to |
|---|---|
| Vehicle Stability Control System | ( )
|
Check the freeze frame data.
If DTCs are output, check the freeze frame data and read the vehicle status when the DTC was stored.
for Freeze Frame Data: Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE SYSTEM>FREEZE FRAME DATA
CLEAR DTC AND FREEZE FRAME DATA (USING GTS)
Turn the ignition switch off.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / ABS/VSC/TRC/EPB Trouble Codes.
Clear the DTCs.
When DTCs are cleared, the freeze frame data will also be cleared.