Home › Brake › PARKING BRAKE › ELECTRIC PARKING BRAKE SYSTEM › 2017.09–2021.02
RM33A0E _54 Brake _065369 PARKING BRAKE _0328504 ELECTRIC PARKING BRAKE SYSTEM C

PARKING BRAKE  ELECTRIC PARKING BRAKE SYSTEM  C13A6  Open or Short Circuit in Motor  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
C13A6 Open or Short Circuit in Motor Parking brake actuator assembly open or short circuit is detected for 0.015 seconds or more.
·

Parking brake actuator assembly

·

Wire harness or connector

·

Skid control ECU (brake actuator assembly)


DTC stored An electric parking brake system malfunction is displayed on the multi-information display.

WIRING DIAGRAM

C320708E24
1.333,0.729 1.75,0.917 0.417,0.188 10 false MRR- 1.292,1.313 1.813,1.552 0.521,0.24 10 false MRR+ 1.313,3.875 1.729,4.063 0.417,0.188 10 false MRL+ 1.333,3.292 1.75,3.479 0.417,0.188 10 false MRL- 3.979,0.729 4.396,0.917 0.417,0.188 10 false MRR- 3.979,1.323 4.396,1.51 0.417,0.188 10 false MRR+ 3.969,3.292 4.385,3.479 0.417,0.188 10 false MRL- 3.958,3.896 4.375,4.083 0.417,0.188 10 false MRL+ 3.615,0.719 4.031,0.906 0.417,0.188 10 false uR2 3.615,3.292 4.031,3.479 0.417,0.188 10 false vR2 5.021,0.708 5.344,0.896 0.323,0.188 10 false u1 1.792,3.177 2.104,3.458 0.313,0.281 10 false 12 1.802,3.76 2.271,4.125 0.469,0.365 10 false 13 1.802,1.177 1.99,1.375 0.188,0.198 10 false 2 1.802,0.594 1.99,0.792 0.188,0.198 10 false 3 0.542,4.396 0.958,4.583 0.417,0.188 10 false A34 0.542,4.573 2.094,5.198 1.552,0.625 10 false Skid Control ECU (Brake Actuator Assembly) 3.833,4.417 5.083,4.948 1.25,0.531 10 false No. 2 Parking Brake Wire Assembly 5.229,4.417 6.667,4.927 1.438,0.51 10 false Parking Brake Actuator Assembly LH 3.75,1.833 5,2.458 1.25,0.625 10 false No. 1 Parking Brake Wire Assembly 5.146,1.844 6.583,2.573 1.438,0.729 10 false Parking Brake Actuator Assembly RH 4.594,3.281 5.01,3.469 0.417,0.188 10 false LE- 4.542,1.302 4.958,1.49 0.417,0.188 10 false RE+ 4.563,0.708 4.979,0.896 0.417,0.188 10 false RE- 3.656,1.083 3.813,1.281 0.156,0.198 10 false 2 5.052,0.531 5.208,0.729 0.156,0.198 10 false 1 5.052,1.115 5.208,1.313 0.156,0.198 10 false 2 3.677,0.49 3.833,0.688 0.156,0.198 10 false 1 3.667,3.667 3.823,3.865 0.156,0.198 10 false 2 5.052,3.094 5.208,3.292 0.156,0.198 10 false 1 5.052,3.688 5.208,3.885 0.156,0.198 10 false 2 3.667,3.063 3.823,3.26 0.156,0.198 10 false 1 3.604,1.313 4.021,1.5 0.417,0.188 10 false uR2 5.021,1.302 5.344,1.49 0.323,0.188 10 false u1 3.615,3.885 4.031,4.073 0.417,0.188 10 false vR2 5.031,3.292 5.448,3.479 0.417,0.188 10 false v1 5.021,3.875 5.438,4.063 0.417,0.188 11 false v1 5.354,0.708 5.771,0.896 0.417,0.188 10 false RE- 5.344,1.302 5.76,1.49 0.417,0.188 10 false RE+ 5.354,3.281 5.771,3.469 0.417,0.188 10 false LE- 4.573,3.885 4.99,4.073 0.417,0.188 10 false LE+ 5.354,3.885 5.771,4.073 0.417,0.188 10 false LE+

CAUTION / NOTICE / HINT

NOTICE:
·

The electric parking brake may still operate up to 20 seconds after the ignition switch is turned off. Before disconnecting connectors or fuses, turn the ignition switch off and wait 20 seconds or more.

·

When replacing the skid control ECU (brake actuator assembly), operate the electric parking brake switch (electric parking brake switch assembly) as the parking brake indicator light blinks (red) when the ignition switch is first turned ON.



PROCEDURE

1.READ VALUE USING GTS (PERMISSION OF RH INTERLOCKING PKB LOCK / PERMISSION OF LH INTERLOCKING PKB LOCK)
a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Chassis / ABS/VSC/TRC/EPB / Data List.


f.

Read the Data List according to the display on the GTS.

Chassis > ABS/VSC/TRC > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Permission of RH Interlocking PKB Lock Parking brake actuator assembly RH parking brake lock control permission status OK or NG OK -
Permission of LH Interlocking PKB Lock Parking brake actuator assembly LH parking brake lock control permission status OK or NG OK -
Chassis > ABS/VSC/TRC > Data List
Tester Display
Permission of RH Interlocking PKB Lock
Permission of LH Interlocking PKB Lock
50003 105 469,473

Result:
Proceed to
NEXT



NEXT

2.INSPECT PARKING BRAKE WIRE ASSEMBLY
2.INSPECT PARKING BRAKE WIRE ASSEMBLY
C360728C16
1.813,0.25 2.229,0.5 0.417,0.25 1.813,0.583 2.229,0.833 0.417,0.25 4.958,0.188 5.375,0.438 0.417,0.25 4.958,0.521 5.375,0.771 0.417,0.25 1.417,2.083 1.875,1.625 true 2.167,1.625 2.583,2.083 true 4.521,2.115 5,1.583 true 5.313,1.583 5.75,2.083 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 1.917,2.094 2.229,2.25 0.313,0.156 10 false *b 5.083,2.094 5.396,2.25 0.313,0.156 10 false *c 1.906,0.302 2.302,0.5 0.396,0.198 10 false uR2 1.917,0.635 2.375,0.833 0.458,0.198 10 false vR2 0.781,2.083 1.219,2.281 0.438,0.198 10 false MRR- 0.781,2.25 1.198,2.438 0.417,0.188 10 false MRL- 2.583,2.281 2.99,2.469 0.406,0.188 10 false MRL+ 2.573,2.104 3,2.302 0.427,0.198 10 false MRR+ 4.042,2.146 4.427,2.344 0.385,0.198 10 false RE- 4.042,2.333 4.427,2.531 0.385,0.198 10 false LE- 5.865,2.115 6.292,2.313 0.427,0.198 10 false RE+ 5.875,2.302 6.292,2.49 0.417,0.188 10 false LE+ 1.208,2.083 1.448,2.281 0.24,0.198 12 false *A 1.208,2.271 1.469,2.479 0.26,0.208 12 false *B 3.021,2.083 3.26,2.281 0.24,0.198 12 false *A 4.354,2.135 4.594,2.333 0.24,0.198 12 false *A 6.167,2.115 6.406,2.313 0.24,0.198 12 false *A 3.031,2.281 3.292,2.49 0.26,0.208 12 false *B 4.365,2.344 4.625,2.552 0.26,0.208 12 false *B 6.177,2.302 6.438,2.51 0.26,0.208 12 false *B 5.104,0.229 5.5,0.427 0.396,0.198 10 false u1 5.125,0.563 5.583,0.76 0.458,0.198 10 false v1 2.281,0.292 2.615,0.542 0.333,0.25 12 false *A 2.281,0.625 2.531,0.875 0.25,0.25 12 false *B 5.438,0.219 5.771,0.469 0.333,0.25 12 false *A 5.438,0.563 5.688,0.813 0.25,0.25 12 false *B
*A RH *B LH
*a Front view of Parking Brake Wire Assembly *b (to wire harness connector)
*c (to Parking Brake Actuator Assembly) - -


a.

Remove the parking brake wire assembly.


b.

Check the parking brake wire assembly for damage.

OK:

No damage.


HINT:

If damaged, there may be a short in the wire harness or a short to ground.



c.

Inspect the parking brake wire assembly.

Standard Resistance:
RH
Tester Connection Condition Specified Condition
uR2-1 (MRR-) - u1-1 (RE-) Always Below 1 Ω
uR2-1 (MRR-) - u1-2 (RE+) Always 10 kΩ or higher
uR2-1 (MRR-) or u1-1 (RE-) - Body ground Always 10 kΩ or higher
uR2-2 (MRR+) - u1-2 (RE+) Always Below 1 Ω
uR2-2 (MRR+) - u1-1 (RE-) Always 10 kΩ or higher
uR2-2 (MRR+) or u1-2 (RE+) - Body ground Always 10 kΩ or higher

LH
Tester Connection Condition Specified Condition
vR2-1 (MRL-) - v1-1 (LE-) Always Below 1 Ω
vR2-1 (MRL-) - v1-2 (LE+) Always 10 kΩ or higher
vR2-1 (MRL-) or v1-1 (LE-) - Body ground Always 10 kΩ or higher
vR2-2 (MRL+) - v1-2 (LE+) Always Below 1 Ω
vR2-2 (MRL+) - v1-1 (LE-) Always 10 kΩ or higher
vR2-2 (MRL+) or v1-2 (LE+) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) - PARKING BRAKE ACTUATOR ASSEMBLY)

NG

REPLACE PARKING BRAKE WIRE ASSEMBLY

3.CHECK HARNESS AND CONNECTOR (SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) - PARKING BRAKE ACTUATOR ASSEMBLY)
a.

Turn the ignition switch off.


b.

Make sure the parking brake wire assembly is securely installed.


c.

Disconnect the A34 skid control ECU (brake actuator assembly) connector.


d.

Disconnect the u1 or v1 parking brake actuator assembly connector.


e.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
RH
Tester Connection Condition Specified Condition
A34-2 (MRR+) - u1-2 (RE+) Always Below 1 Ω
A34-3 (MRR-) - u1-1 (RE-) Always Below 1 Ω
A34-2 (MRR+) or u1-2 (RE+) - Body ground Always 10 kΩ or higher
A34-3 (MRR-) or u1-1 (RE-) - Body ground Always 10 kΩ or higher

LH
Tester Connection Condition Specified Condition
A34-13 (MRL+) - v1-2 (LE+) Always Below 1 Ω
A34-12 (MRL-) - v1-1 (LE-) Always Below 1 Ω
A34-13 (MRL+) or v1-2 (LE+) - Body ground Always 10 kΩ or higher
A34-12 (MRL-) or v1-1 (LE-) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

4.INSPECT PARKING BRAKE ACTUATOR ASSEMBLY
a.

Inspect the parking brake actuator assembly.

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE ACTUATOR>INSPECTION


Result:
Proceed to
OK
NG



OK

NG

REPLACE PARKING BRAKE ACTUATOR ASSEMBLY