Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › VACUUM SWITCHING VALVE (for Engine Mounting)
RM33A0E _51 Engine / Hybrid System _065341 A25A-FKS ENGINE CONTROL _0328590 VACUUM SWITCHING VALVE(for Engine Mounting) A

A25A-FKS ENGINE CONTROL  VACUUM SWITCHING VALVE(for Engine Mounting)  REMOVAL  


PROCEDURE

Hide 53295E 1.REMOVE COOL AIR INTAKE DUCT SEAL

Hide 12601B 2.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 17750A 3.REMOVE INLET AIR CLEANER ASSEMBLY

Hide 4.REMOVE AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE

Hide 17650H 5.REMOVE VACUUM SWITCHING VALVE (for Active Control Engine Mount System)

a.
A402386

Remove the bolt and disengage the 2 wire harness clamps to separate the engine wire.


b.
A402387

Remove the bolt and wire harness clamp bracket from the transmission case side cover.


c.
A402388

Disengage the wire harness clamp and disconnect the vacuum switching valve (for active control engine mount system) connector.


d.
A402389

Disconnect the 3 vacuum hoses from the vacuum switching valve (for active control engine mount system).


e.

Remove the nut and vacuum switching valve (for active control engine mount system) from the front engine mounting insulator.