Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › ACTIVE CONTROL ENGINE MOUNT (for Rear Side)
RM33A0E _51 Engine / Hybrid System _065341 A25A-FKS ENGINE CONTROL _0328592 ACTIVE CONTROL ENGINE MOUNT(for Rear Side) A

A25A-FKS ENGINE CONTROL  ACTIVE CONTROL ENGINE MOUNT(for Rear Side)  INSTALLATION  


PROCEDURE

Hide 12371A 1.INSTALL REAR ENGINE MOUNTING INSULATOR

a.

Engage the clamp and install the vacuum hose to the rear engine mounting insulator.


b.

Install the wire harness clamp bracket to the rear engine mounting insulator with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.
A402402C01
0.969,1.594 0.969,1.26 false 1.313,1.49 1.313,1.219 false 2.542,1.677 2.542,1.135 true 2.271,1.938 2.271,1.563 false 1.292,0.646 1.083,0.646 1.083,0.646 1.083,1.094 true 0.917,1.615 1.229,1.771 0.313,0.156 10 false *1 2.219,1.958 2.531,2.115 0.313,0.156 10 false *2 1.25,1.5 1.563,1.656 0.313,0.156 10 false *a 2.49,1.698 2.802,1.854 0.313,0.156 10 false *b 1.323,0.563 1.635,0.719 0.313,0.156 10 false *b
*1 Rear Engine Mounting Bracket
*2 Rear Engine Mounting Insulator
*a Protrusion
*b Hole


Align the hole of the rear engine mounting insulator with the protrusion of the rear engine mounting bracket, slide the rear engine mounting insulator onto the rear engine mounting bracket to align the holes and install the rear engine mounting insulator with the bolt.

Torque:
72 N*m (734 kgf*cm, 53 ft.*lbf)