89668
1.INSTALL NO. 2 ECM BRACKET
Install the No. 2 ECM bracket to the ECM with the 2 screws.
89667E
2.INSTALL NO. 1 ECM BRACKET
Install the No. 1 ECM bracket to the ECM with the 2 screws.
89661
3.INSTALL ECM
Install the ECM with the 2 bolts and nut.
If the ECM has been struck or dropped, replace it.
Connect the 3 ECM connectors and rotate the 3 levers to lock them.
When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
Be sure to securely connect the ECM connectors.
4.INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
17750A
5.INSTALL INLET AIR CLEANER ASSEMBLY
12601B
6.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
53295E
7.INSTALL COOL AIR INTAKE DUCT SEAL
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9.PERFORM INITIALIZATION