Home › Engine / Hybrid System › A25A-FKS (ENGINE CONTROL) › ENGINE OIL TEMPERATURE SENSOR › 2017.09–2019.10
RM33A0E _51 Engine / Hybrid System _065341 A25A-FKS ENGINE CONTROL _0328600 ENGINE OIL TEMPERATURE SENSOR A

A25A-FKS ENGINE CONTROL  ENGINE OIL TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89429F 1.INSTALL ENGINE OIL TEMPERATURE SENSOR

a.

Install a new gasket to the engine oil temperature sensor.


b.
A402376N01
2.042,1.469 2.469,1.469 true 2.479,1.375 2.938,1.573 0.458,0.198 10 true SST

Using SST, install the engine oil temperature sensor to the cylinder block sub-assembly.

SST
09817-33191  

Torque:
19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTICE:

If the engine oil temperature sensor has been struck or dropped, replace it.



c.

Connect the engine oil temperature sensor connector.


Hide 3.INSPECT FOR ENGINE OIL LEAK

Hide 4.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 53852K 6.INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

Hide 53851M 7.INSTALL FRONT WHEEL OPENING EXTENSION PAD RH