Home › Engine / Hybrid System › 2GR-FKS (EMISSION CONTROL) › PURGE VALVE
RM33A0E _51 Engine / Hybrid System _065335 2GR-FKS EMISSION CONTROL _0328621 PURGE VALVE A

2GR-FKS EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 11209 1.REMOVE V-BANK COVER SUB-ASSEMBLY

Hide 25860 2.REMOVE PURGE VALVE (PURGE VSV)

a.
A412393C01
1.125,0.438 1.396,0.438 1.396,0.438 1.615,0.698 true 2.135,0.938 2.396,1.292 2.396,1.292 2.646,1.292 true 0.958,0.365 1.167,0.563 0.208,0.198 10 true *1 2.667,1.208 2.875,1.375 0.208,0.167 10 true *2
*1 No. 1 Fuel Vapor Feed Hose
*2 Fuel Vapor Feed Hose


Disconnect the purge valve (purge VSV) connector.


b.

Slide the clip and disconnect the fuel vapor feed hose from the purge valve (purge VSV).


c.

Disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).


d.

Remove the bolt and purge valve (purge VSV) from the intake air surge tank assembly.