Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › PURGE VALVE › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065326 2AR-FE EMISSION CONTROL _0328633 PURGE VALVE A

2AR-FE EMISSION CONTROL  PURGE VALVE  REMOVAL  


PROCEDURE

Hide 25860 1.REMOVE PURGE VALVE (PURGE VSV)

a.
A407085C01
1.667,0.854 1.906,0.531 1.906,0.531 2.135,0.531 true 0.948,1.698 0.948,1.323 0.948,1.323 1.104,1.115 true 1.938,1.323 2.448,1.323 true 2.146,0.438 2.365,0.615 0.219,0.177 10 true *1 0.875,1.677 1.073,1.875 0.198,0.198 10 true *2 2.479,1.229 2.667,1.406 0.188,0.177 10 true *3
*1 No. 1 Fuel Vapor Feed Hose
*2 No. 2 Fuel Vapor Feed Hose
*3 Purge Valve (Purge VSV)


Disconnect the purge valve (purge VSV) connector.


b.

Slide the clip and disconnect the No. 1 fuel vapor feed hose from the purge valve (purge VSV).


c.

Slide the clip and disconnect the No. 2 fuel vapor feed hose from the purge valve (purge VSV).


d.

Remove the bolt and purge valve (purge VSV) from the intake manifold.