Home › Engine / Hybrid System › 2AR-FE EMISSION CONTROL › PCV VALVE › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065326 2AR-FE EMISSION CONTROL _0328635 PCV VALVE G

2AR-FE EMISSION CONTROL  PCV VALVE  INSPECTION  


PROCEDURE

Hide 12204 1.INSPECT PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY)

a.

Install a hose to the PCV valve (ventilation valve sub-assembly).


b.

Check the operation of the PCV valve (ventilation valve sub-assembly).

i.
A287371C07
2.677,0.781 2.354,0.385 2.354,0.385 2.125,0.385 false 1.927,0.292 2.24,0.448 0.313,0.156 10 false *a 1.25,1.01 1.448,1.208 0.198,0.198 10 true *b 3.188,1.01 3.385,1.208 0.198,0.198 10 true *b
*a Hose
*b Air
V100135

Ventilation Case Sub-assembly Side


Blow air into the ventilation case sub-assembly side, and check that air passes through easily.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).


ii.
A315155C02
0.573,1.802 0.729,1.802 0.729,1.802 0.958,1.323 false 0.365,1.74 0.677,1.896 0.313,0.156 10 false *a 0.5,1.031 0.698,1.229 0.198,0.198 10 false *b
*a Hose
*b Air
V100135

Intake Manifold Side


Blow air into the intake manifold side, and check that air passes through with difficulty.

CAUTION:

Do not suck air through the valve.

Petroleum substances inside the valve are hazardous to your health.


If the result is not as specified, replace the PCV valve (ventilation valve sub-assembly).



c.

Remove the hose from the PCV valve (ventilation valve sub-assembly).