Home › Engine / Hybrid System › 2AR-FE (INTAKE / EXHAUST) › VACUUM SWITCHING VALVE (for ACIS) › 2017.09–2021.02
RM33A0E _51 Engine / Hybrid System _065327 2AR-FE INTAKE / EXHAUST _0328639 VACUUM SWITCHING VALVE(for ACIS) G

2AR-FE INTAKE / EXHAUST  VACUUM SWITCHING VALVE(for ACIS)  INSPECTION  


PROCEDURE

Hide 17650 1.INSPECT VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

a.
A203601C01
1.729,4.469 1.5,4.469 1.5,4.469 1.5,3.813 true 1.781,4.396 2.094,4.552 0.313,0.156 10 false *a
*a Valve Body


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 37 to 44 Ω
1 - Valve body Always 10 kΩ or higher
2 - Valve body


If the result is not as specified, replace the vacuum switching valve assembly (for ACIS).


b.

Check the operation of the vacuum switching valve assembly (for ACIS).

i.
A201321C04
2.083,3.365 2.25,4.021 2.25,4.021 2.438,4.021 false 0.448,3.219 0.635,3.219 0.635,3.219 0.958,3.604 false 2.5,3.938 2.813,4.094 0.313,0.156 10 false *a 0.198,3.125 0.51,3.281 0.313,0.156 10 false *b 2.938,2.594 3.25,2.75 0.313,0.156 10 false *c
*a Filter
*b Port (E)
*c Air


When vacuum is applied to the port (E), check that air is sucked into the filter.

If the result is not as specified, replace the vacuum switching valve assembly (for ACIS).


ii.
A201322C03
1.01,4.198 1.01,3.844 1.01,3.844 0.594,3.51 true 0.156,4.052 0.156,3.802 0.156,3.802 0.344,3.51 true 0.927,4.219 1.24,4.375 0.313,0.156 10 false *a 0.104,4.104 0.344,4.292 0.24,0.188 10 false *b 0.708,2.271 0.979,2.458 0.271,0.188 10 false *c
*a Port (E)
*b Port (F)
*c Air


Apply battery voltage across the terminals. When vacuum is applied to the port (F), check that air is sucked into the port (E).

If the result is not as specified, replace the vacuum switching valve assembly (for ACIS).